Agilent Technologies 7100 User Manual page 58

3 Installing the Instrument
Installing the Instrument
Connecting Cables
The Agilent CE instrument has the following connectors on the rear.
• All electrical connectors, such as line power, LAN connector or fuses, are
• All connectors for liquids and external pressure supply are located on the
1 Ensure that the line power switch on the front of the instrument is OFF.
2 Connect the following cables as shown in
For a description of remaining items refer to the Hardware section.
• For more information on cable connection to 3
58
located on the right-hand side of the electronic box on the back of the
instrument.
left-hand side of the electronic box.
a One power cable
b LAN cable, which connects the Agilent CE instrument directly to the
computer with the Agilent ChemStation installed or to the local network.
out, please refer to "Hardware Information"
Table 2
Agilent 7100 Capillary Electrophoresis System User Manual
and in Figure 2.
rd
party detectors or analog
on page 171.