Physical Specifications - Agilent Technologies 7100 User Manual

Physical Specifications

Table 2
Type
Weight
Dimensions
(width × depth × height)
Line voltage
Line frequency
Power consumption
Ambient operating
temperature
Ambient non-operating
temperature
Humidity
Operating altitude
External cooling
External pressure
Safety standards: IEC,
CSA, UL
Housing
For applications run in CEC mode (Capillary Electrochromatography) or CE+p
mode (Capillary Electrophoresis mode with optional usage of higher pressure), an
external pressure supply of oil-free air or nitrogen with a maximum pressure of 15
bar (218 psi) can be used. A respective male adapter that fits into the instrument's
female adapter and PTFE tubing are part of the shipment.
The Agilent 7100 Capillary Electrophoresis System is designed to operate in a typical
N O T E
electromagnetic environment where RF transmitters, such as mobile phones, should not be
used in close proximity.
Agilent 7100 Capillary Electrophoresis System User Manual

Physical specifications

Specification
35 kg (77.2 lbs)
350 x 510 x 590 mm
(13.8 x 20.1 x 23.2 inches)
100–240 VAC ± 10%
50 or 60 Hz ± 5%
350 VA / 300 W / 1024 BTU/h Maximum
5–40 °C (41–104 °F)
-40 to 70°C (-40 to 158 °F)
below 80% at 31 °C (87.8 °F)
Up to 2000 m (6500 ft)
max. 0.5 bar (7.2 psi),
max. 50 °C (122 °F)
2-12 bar (29-174 psi)
Installation category II,
Pollution degree 2
All materials are recyclable
Site Requirements and Specifications
Physical Specifications
Comments
Wide-ranging capability
Non-condensing
Waterbath
Oil-free air or nitrogen
For indoor use only
2
21