Agilent Technologies 7100 User Manual page 226

8 Maintenance
Changing the Lamp
5 Disconnect the lamp cable's 8-fold connector. Pull the connector, not the
Injuries due to burns
WA R N I N G
Touching a hot lamp can cause serious burns.
• If you were using the instrument shortly before, the lamp may be very hot. Wait until
Lamp screws
Positioning pin
Latch
Connector
Figure 72
6 Loosen the two lamp screws using the Pozidriv screwdriver and lift the
226
cable.
it has cooled down before touching the lamp.
Exchanging a lamp
lamp out carefully.
Agilent 7100 Capillary Electrophoresis System User Manual