Agilent Technologies 7100 User Manual page 152

5 Using the Agilent 7100 Capillary Electrophoresis System
Capillary Electrochromatography, CEC
Damage or contamination of pressure valves.
WA R N I N G
Make sure tube "8" is connected properly before you apply high pressure to any lift.
High pressure may flush liquid into the pressure valves and lead to permanent
damage.
• Connect tube "8" prior to using high pressure.
9 Close and restart ChemStation to fully apply the changes.
10 The activated CE+p mode is displayed in the top line of the CE diagram and
Figure 46
152
a new icon for an external pressure reservoir will appear, see
CE diagram with CEC mode activated
Agilent 7100 Capillary Electrophoresis System User Manual
Figure 46.