Physical Specifications - Agilent Technologies 1200 Series User Manual

Physical Specifications

Table 4
Type
Weight
Dimensions
(width × depth × height)
Line voltage
Line frequency
Power consumption
Ambient operating
temperature
Ambient non-operating
temperature
Humidity
Operating Altitude
Non-operating altitude
Safety standards: IEC, CSA,
UL
Hot rear panel
WA R N I N G
Using the autosampler at high environmental temperatures may cause the rear
panel to become hot.
➔
Agilent 1200 Series Autosampler User Manual

Physical Specifications

Do not use the autosampler at environmental temperatures higher than 50 °C
(122 °F)
Site Requirements and Specifications
Specification
14.2 kg (32 lbs)
200 × 345 × 435 mm (8 × 13.5 × 17
inches)
100 – 240 VAC, ± 10%
50 or 60 Hz, ± 5%
300 VA / 200 W / 683 BTU
0–55 °C (32–131 °F)
-40–70 °C (-4–158 °F)
< 95%, at 25–40 °C (77–104 °F)
Up to 2000 m (6500 ft)
Up to 4600 m (14950 ft)
Installation Category II, Pollution
Degree 2
Physical Specifications
Comments
Wide-ranging capability
Maximum
See warning "" on page 27
Non-condensing
For storing the module
For indoor use only. Research
Use Only. Not for use in
Diagnostic Procedures.
2
27