Table of Contents
Advertisement
3 G
S
ETTING
TARTED
U
NPACKING THE DEVICE
3
G
ETTING
10
S
TARTED
Unpacking the device
Packing material
We suggest that you keep the original packing material. It is
designed for reuse (unless it is damaged during shipping). Using
the original packing material ensures that the device is properly
protected during shipping.
Checking the package contents
Your device is shipped with the following accessories:
• 2.5 mm universal adapter
• 2 dry batteries AA
• User manual
• Belt bag
Checking for shipping damage
After you unpack the device, check to see if it has been damaged
during shipping. This is particularly likely if the packaging is
visibly damaged. If there is damage, do not attempt to operate
the device. Doing so can cause further damage. In case of
damage, please contact your local Viavi Sales Company.
Addresses can be found at
Recovery following storage/shipping
Condensation can occur if a device that is stored or shipped at a
low temperature is brought into a warm environment. To prevent
damage, wait until no more condensation is visible on the
surface of the device before powering it up. Do not operate the
instrument until it has reached its specified temperature range
and wait until it has cooled down if the instrument was stored at
a high temperature (see
page
35).
www.viavisolutions.com.
"Environmental conditions" on
OLP-39G/-39X TruePON Tester
Advertisement
Table of Contents
