Opening A Report - Viavi T-BERD/MTS 2000 User Manual

Chapter 5 Launching a reflectometry test and displaying results
Saving the trace(s) and generating a report
Example: if 3 traces are displayed in overlay, 3 .sor files and 3 pdf/txt files will be
saved.
• If in the File Setup page (S
with All Traces, one single .msor file and one single txt/pdf report will be gener-
ated, bringing together all traces.
Example: if 3 traces are displayed in overlay, one single .msor file and one single
txt/pdf file (with one trace per page; except if the results table is too long for one
page) will be saved.

Opening a report

1 To open the report, press F
2 In the Explorer page, in the directory selected, select the file/report.
The file name is:
For the txt file: trace file_sor.txt
For the pdf file: trace file.sor.pdf
3 Press Load.
The file opens on the equipment.
94
ETUP
hardkey
ILE
User Manual
> File), the parameter File Content is defined
77000010208 Rev. 012