Cursor Group - YOKOGAWA WT1800 User Manual

5.5

CURSor Group

The commands in this group deal with cursor measurements. You can make the same settings and queries (of
settings and measured values) that you can make by pressing CURSOR (SHIFT+FORM) on the front panel.
:CURSor?
Function Queries all cursor measurement settings.
:CURSor?
Syntax
:CURSor:BAR?
Function Queries all bar graph display cursor measurement
settings.
:CURSor:BAR?
Syntax
Description The bar graph display's cursor feature is
only available on models with the harmonic
measurement (/G5 or /G6) option.
:CURSor:BAR:LINKage
Function Sets or queries the on/off status of the cursor
position linkage on the bar graph display.
:CURSor:BAR:LINKage {<Boolean>}
Syntax
:CURSor:BAR:LINKage?
:CURSOR:BAR:LINKAGE OFF
Example
:CURSOR:BAR:LINKAGE? ->
:CURSOR:BAR:LINKAGE 0
:CURSor:BAR:POSition<x>
Function Sets or queries the position of the specified
cursor on the bar graph display.
:CURSor:BAR:POSition<x> {<NRf>}
Syntax
:CURSor:BAR:POSition<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 0 to 500
:CURSOR:BAR:POSITION1 1
Example
:CURSOR:BAR:POSITION1? ->
:CURSOR:BAR:POSITION1 1
:CURSor:BAR[:STATe]
Function Sets or queries the on/off status of the cursor
display on the bar graph display.
:CURSor:BAR[:STATe] {<Boolean>}
Syntax
:CURSor:BAR:STATe?
:CURSOR:BAR:STATE ON
Example
:CURSOR:BAR:STATE? ->
:CURSOR:BAR:STATE 1
IM WT1801-17EN
:CURSor:BAR:{Y<x>|DY}?
Function Queries the measured value of the specified
cursor on the bar graph display.
:CURSor:BAR:{Y<x>|DY}?
Syntax
Y<x> = Y-axis value of the cursor
position (Y1 = Y1 +, Y2 +, Y3 +; Y2
= Y1 x, Y2 x, Y3 x)
DY = Difference between the cursor
Y-axis values (DY1, DY2, DY3)
:CURSOR:BAR:Y1? -> 78.628E+00
Example
Description • When multiple bar graphs are displayed, the
cursor measured values of each bar graph are
returned in order.
• If the bar graph cursor display is not turned on,
NAN (Not A Number) is returned.
:CURSor:TRENd?
Function Queries all trend display cursor measurement
settings.
:CURSor:TRENd?
Syntax
:CURSor:TRENd:LINKage
Function Sets or queries the on/off status of the cursor
position linkage on the trend display.
:CURSor:TRENd:LINKage {<Boolean>}
Syntax
:CURSor:TRENd:LINKage?
:CURSOR:TREND:LINKAGE OFF
Example
:CURSOR:TREND:LINKAGE? ->
:CURSOR:TREND:LINKAGE 0
:CURSor:TRENd:POSition<x>
Function Sets or queries the position of the specified
cursor on the trend display.
:CURSor:TRENd:POSition<x> {<NRf>}
Syntax
:CURSor:TRENd:POSition<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 0 to 1601
:CURSOR:TREND:POSITION1 160
Example
:CURSOR:TREND:POSITION1? ->
:CURSOR:TREND:POSITION1 160
:CURSor:TRENd[:STATe]
Function Sets or queries the on/off status of the cursor
display on the trend display.
:CURSor:TRENd[:STATe] {<Boolean>}
Syntax
:CURSor:TRENd:STATe?
:CURSOR:TREND:STATE ON
Example
:CURSOR:TREND:STATE? ->
:CURSOR:TREND:STATE 1
1
2
3
4
5
6
App
Index
5-21