YOKOGAWA WT1800 User Manual page 113

:NUMeric:HSPeed:HEADer?
Function Queries the header of the numeric data of high
speed data capturing mode.
:NUMeric:HSPeed:HEADer? {<NRf>}
Syntax
<NRf> = 1 to 30 (item number)
• When <NRf> is specified:
Example
:NUMERIC:HSPEED:HEADER? 1 -> U-E1
• When <NRf> is omitted (when :NUMeric
:HSPeed:NUMber is set to 3):
:NUMERIC:HSPEED:HEADER? ->
U-E1,I-E1,P-E1
Description • This command is only valid on models with the
high speed data capturing (/HS) option.
• The data name (header) of the output item is
generated.
• If <NRf> is specified, only the data name for
the specified item number is output.
• If <NRf> is omitted, the data names of the
items from 1 to the number specified by the :
NUMeric:HSPeed:NUMber command are
output in order.
:NUMeric:HSPeed:ITEM<x>
Function Sets or queries the output item (function and
element) of the specified high speed data
capturing mode numeric data item.
:NUMeric:HSPeed:ITEM<x> {NONE|
Syntax
<Function>[,<Element>]}
:NUMeric:HSPeed:ITEM<x>?
<x> = 1 to 30 (item number)
NONE = No output item
<Function> = {U|I|P|SPEed|TORQue||PM
AUX<x>} (<x> = 1 to 2)
<Element> = {<NRf>|SIGMa|SIGMB|
SIGMC} (<NRf> = 1 to 6)
:NUMERIC:HSPEED:ITEM1 U,1
Example
:NUMERIC:HSPEED:ITEM1? ->
:NUMERIC:HSPEED:ITEM1 U,1
Description • This command is only valid on models with
thehigh speed data capturing (/HS) option.
• If <Element> is omitted, the element is set to 1.
• <Element> is omitted from responses to functions
that do not need it.
• SPEed, TORQue and PM are only valid on
models with the motor evaluation function
(/MTR) option.
• AUX<x> is only valid on models with the
auxiliary input (/AUX) option.
IM WT1801-17EN
:NUMeric:HSPeed:{MAXimum|MINimum}?
Function Queries the maximum or minimum value of the
numeric data of high speed data capturing mode.
:NUMeric:HSPeed:{MAXimum|
Syntax
MINimum}? {<NRf>}
<NRf> = 1 to 30 (item number)
• When <NRf> is specified:
Example
:NUMERIC:HSPEED:MAXIMUM? 1 ->
103.79E+00
• When <NRf> is omitted (when :NUMeric
:HSPeed:NUMber is set to 3):
:NUMERIC:HSPEED:MAXIMUM? ->
103.79E+00,1.0185E+00,105.27E+00
• When :NUMeric:FORMat is set to FLOat:
:NUMERIC:HSPEED:MAXIMUM? ->
#N (N-digit byte number; data byte
sequence)
Description • This command is only valid on models with the
high speed data capturing (/HS) option.
• The maximum value or minimum value of all
the numeric data from the time that capturing
started to the current data update is output.
• If <NRf> is specified, only the maximum value
or minimum value of the numeric data of the
specified item number is output.
• If <NRf> is omitted, the maximum values or
minimum values of the numeric data of the
items from 1 to the number specified by the :
NUMeric:HSPeed:NUMber command are
output in order.
:NUMeric:HSPeed:NUMber
Function Sets or queries the number of numeric data items
that are transmitted by the :NUMeric:HSPeed:
VALue? command.
:NUMeric:HSPeed:NUMber {<NRf>}
Syntax
:NUMeric:HSPeed:NUMber?
<NRf> = 1 to 30
:NUMERIC:HSPEED:NUMBER 3
Example
:NUMERIC:HSPEED:NUMBER ->
:NUMERIC:HSPEED:NUMBER 3
Description • This command is only valid on models with the
high speed data capturing (/HS) option.
• If you omit the parameters to the :NUMeric:
HSPeed:VALue? query, as many data records
as are captured in a single data update interval
are output in order. A single data record
contains the numeric data items from number 1
to the specified value.
• By default, the number of numeric data items is
set to 3.
5.17 NUMeric Group
App
Index
5-81
1
2
3
4
5
6