YOKOGAWA WT1800 User Manual page 55

5.6 DISPlay Group
The commands in this group deal with the display.
You can make the same settings and queries that you can make by pressing the keys in the front panel DISPLAY and
ITEM & ELEMENT areas.
:DISPlay?
Function Queries all display settings.
:DISPlay?
Syntax
Description Returns all settings that correspond to the current
display mode (:DISPlay:MODE).
:DISPlay:BAR?
Function Queries all bar graph display settings.
:DISPlay:BAR?
Syntax
Description The bar graph display is only available on models
with the harmonic measurement (/G5 or /G6)
option.
:DISPlay:BAR:FORMat
Function Sets or queries the bar graph display format.
:DISPlay:BAR:FORMat {SINGle|DUAL|
Syntax
TRIad}
:DISPlay:BAR:FORMat?
:DISPLAY:BAR:FORMAT SINGLE
Example
:DISPLAY:BAR:FORMAT? ->
:DISPLAY:BAR:FORMAT SINGLE
:DISPlay:BAR:ITEM<x>?
Function Queries all the display settings of the specified
bar graph.
:DISPlay:BAR:ITEM<x>?
Syntax
<x> = 1 to 3 (item number)
:DISPlay:BAR:ITEM<x>[:FUNCtion]
Function Sets or queries the function and element of the
specified bar graph item.
:DISPlay:BAR:ITEM<x>[:
Syntax
FUNCtion] {<Function>,<Element>}
:DISPlay:BAR:ITEM<x>:FUNCtion?
<x> = 1 to 3 (item number)
<Function> = {U|I|P|S|Q|LAMBda|PHI|
PHIU|PHII|Z|RS|XS|RP|XP}
<Element> = 1 to 6
:DISPLAY:BAR:ITEM1 U,1
Example
:DISPLAY:BAR:ITEM1? ->
:DISPLAY:BAR:ITEM1 U,1
Description For information about the options available for
<Function>, see Function Option List (2) on page
5-41.
IM WT1801-17EN
:DISPlay:BAR:ITEM<x>:SCALing?
Function Queries all scaling settings for the specified bar
graph.
:DISPlay:BAR:ITEM<x>:SCALing?
Syntax
<x> = 1 to 3 (item number)
:DISPlay:BAR:ITEM<x>:SCALing:MODE
Function Sets or queries the scaling mode of the specified
bar graph.
:DISPlay:BAR:ITEM<x>:SCALing:
Syntax
MODE {FIXed|MANual}
:DISPlay:BAR:ITEM<x>:SCALing:MODE?
<x> = 1 to 3 (item number)
:DISPLAY:BAR:ITEM1:SCALING:
Example
MODE FIXED
:DISPLAY:BAR:ITEM1:SCALING:MODE? ->
:DISPLAY:BAR:ITEM1:SCALING:
MODE FIXED
:DISPlay:BAR:ITEM<x>:SCALing:VALue
Function Sets or queries the upper limit of the manual
scaling of the specified bar graph.
:DISPlay:BAR:ITEM<x>:SCALing:
Syntax
VALue {<NRf>}
:DISPlay:BAR:ITEM<x>:SCALing:VALue?
<x> = 1 to 3 (item number)
<NRf> = 0 to 9.999E+12
:DISPLAY:BAR:ITEM1:SCALING:VALUE 100
Example
:DISPLAY:BAR:ITEM1:SCALING:VALUE? ->
:DISPLAY:BAR:ITEM1:SCALING:
VALUE 100.0E+00
Description • This command is valid when the scaling mode
of the bar graph (:DISPlay:BAR:ITEM<x>:
SCALing:MODE) is set to MANual.
• This command only sets the upper limit. The
lower limit is determined automatically (as
shown below) according to the vertical scaling
mode (:DISPlay:BAR:ITEM<x>:SCALing:
VERTical).
(1) When the mode is LINear: 0 when the X-axis
position (:DISPlay:BAR:ITEM<x>:SCALing:
XAXis) is "BOTTom;" the negative value of the
upper limit when the X-axis position is "CENTer"
(2) When the mode is LOG: The upper limit/10000
1
2
3
4
5
6
App
Index
5-23