YOKOGAWA WT1800 User Manual page 43

Command
:MEASure:EVENt<x>:TLABel
:MEASure:FREQuency?
:MEASure:FREQuency:ITEM<x>
:MEASure:FUNCtion<x>?
:MEASure:FUNCtion<x>:EXPRession Sets or queries the equation of the specified user-defined function.
:MEASure:FUNCtion<x>:NAME
:MEASure:FUNCtion<x>[:STATe]
:MEASure:FUNCtion<x>:UNIT
:MEASure:MHOLd
:MEASure:PC?
:MEASure:PC:IEC
:MEASure:PC:P<x>
:MEASure:PHASe
:MEASure:SAMPling
:MEASure:SFORmula
:MEASure:SQFormula
:MEASure:SYNChronize
MOTor Group
:MOTor?
:MOTor:EANGle?
:MOTor:EANGle:CORRection?
:MOTor:EANGle:CORRection:AENT
er?
:MOTor:EANGle:CORRection:AENTer
[:EXECute]
:MOTor:EANGle:CORRection:AENTer
:TARGet
:MOTor:EANGle:CORRection:CLEar
:MOTor:EANGle:CORRection[:VAL
ue]
:MOTor:EANGle[:STATe]
:MOTor:FILTer?
:MOTor:FILTer[:LINE]
:MOTor:PM?
:MOTor:PM:SCALing
:MOTor:PM:UNIT
:MOTor:POLE
:MOTor:SPEed?
:MOTor:SPEed:AUTO
:MOTor:SPEed:LSCale?
:MOTor:SPEed:LSCale:AVALue
:MOTor:SPEed:LSCale:BVALue
:MOTor:SPEed:LSCale:CALCulate?
:MOTor:SPEed:LSCale:CALCulate:
{P1X|P1Y|P2X|P2Y}
:MOTor:SPEed:LSCale:CALCulate:E
XECute
:MOTor:SPEed:PRANge
:MOTor:SPEed:PULSe
:MOTor:SPEed:RANGe
:MOTor:SPEed:SCALing
IM WT1801-17EN
Function
Sets or queries the string that is displayed when the specified user-defined
event's condition is met.
Queries all frequency measurement settings.
Sets or queries the element whose frequency will be measured.
Queries all the settings of the specified user-defined function.
Sets or queries the name of the specified user-defined function.
Sets or queries the on/off status of the specified user-defined function.
Sets or queries the unit that is added to the computation result of the
specified user-defined function.
Sets or queries the on/off status of the MAX HOLD feature used in user-
defined functions.
Queries all Pc (Corrected Power) computation settings.
Sets or queries the Pc (Corrected Power) equation.
Sets or queries a Pc (Corrected Power) equation parameter.
Sets or queries the display format of the phase difference.
Sets or queries the sampling frequency.
Sets or queries the equation used to compute S (apparent power).
Sets or queries the equation used to compute S (apparent power) and Q
(reactive power).
Sets or queries the synchronized measurement mode.
Queries all motor evaluation function settings.
Queries all electrical angle measurement settings.
Queries all electrical angle correction settings.
Queries all automatic electrical angle correction entry settings.
Executes an automatic electrical angle correction entry.
Sets or queries the target source for automatically entering the electrical
angle correction value.
Clears the electrical angle correction value.
Sets or queries the electrical angle correction value.
Sets or queries the on/off status of electrical angle measurement.
Queries all input filter settings.
Sets or queries the line filter.
Queries all motor output (Pm) settings.
Sets or queries the motor output computation scaling factor.
Sets or queries the unit that is added to the motor output computation result. 5-76
Sets or queries the motor's number of poles.
Queries all rotating speed (Speed) settings.
Sets or queries the voltage auto range on/off status of the revolution signal
(analog input type).
Queries all revolution signal (analog input type) linear scaling settings.
Sets or queries the slope (A) of the linear scale of the revolution signal (analog
input type).
Sets or queries the offset (B) of the linear scale of the revolution signal (analog
input type).
Queries all parameter calculation settings for the linear scale of the revolution
signal (analog input type).
Sets or queries the data (Point1X, Point1Y, Point2X, or Point2Y) for
parameter calculations of the linear scale of the revolution signal (analog
input type).
Calculates parameters for the linear scale of the revolution signal (analog
input type).
Sets or queries the range of the revolution signal (pulse input type).
Sets or queries the number of pulses of the revolution signal (pulse input
type).
Sets or queries the voltage range of the revolution signal (analog input type). 5-77
Sets or queries the rotating speed computation scaling factor.
5.1 List of Commands
Page
5-73
5-73
5-73
5-73
5-73
5-73
5-73
5-73
5-73
5-74
5-74
5-74
5-74
5-74
5-74
5-74
5-74
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-75
5-76
5-76
5-76
5-76
5-76
5-76
5-76
5-76
5-76
5-76
5-77
5-77
5-77
5-11
1
2
3
4
5
6
App
Index