System Group - YOKOGAWA WT1800 User Manual

5.21 SYSTem Group

The commands in this group deal with the system.You can make the same settings and queries that you can make by
pressing UTILITY on the front panel and then using the System Config menu.
:SYSTem?
Function Queries all system settings.
:SYSTem?
Syntax
:SYSTem:CLOCk?
Function Queries all date/time settings.
:SYSTem:CLOCk?
Syntax
:SYSTem:CLOCk:DISPlay
Function Sets or queries the on/off status of the date/time
display.
:SYSTem:CLOCk:DISPlay {<Boolean>}
Syntax
:SYSTem:CLOCk:DISPlay?
:SYSTEM:CLOCK:DISPLAY ON
Example
:SYSTEM:CLOCK:DISPLAY? ->
:SYSTEM:CLOCK:DISPLAY 1
:SYSTem:CLOCk:SNTP?
Function Queries all settings related to using SNTP to set
the date and time.
:SYSTem:CLOCk:SNTP?
Syntax
:SYSTem:CLOCk:SNTP[:EXECute]
Function Uses SNTP to set the date and time.
:SYSTem:CLOCk:SNTP[:EXECute]
Syntax
:SYSTEM:CLOCK:SNTP:EXECUTE
Example
:SYSTem:CLOCk:SNTP:GMTTime
Function Sets or queries the time difference from
Greenwich Mean Time.
:SYSTem:CLOCk:SNTP:GMTTime
Syntax
{<String>}
:SYSTem:CLOCk:SNTP:GMTTime?
<String> = "HH:MM" (HH = hours, MM =
minutes)
:SYSTEM:CLOCK:SNTP:GMTTIME "09:00"
Example
:SYSTEM:CLOCK:SNTP:GMTTIME? ->
:SYSTEM:CLOCK:SNTP:GMTTIME "09:00"
:SYSTem:CLOCk:TYPE
Function Sets or queries the date/time setup method.
:SYSTem:CLOCk:TYPE {MANual|SNTP}
Syntax
:SYSTem:CLOCk:TYPE?
:SYSTEM:CLOCK:TYPE MANUAL
Example
:SYSTEM:CLOCK:TYPE? ->
:SYSTEM:CLOCK:TYPE MANUAL
IM WT1801-17EN
:SYSTem:DATE
Function Sets or queries the date.
:SYSTem:DATE {<String>}
Syntax
:SYSTem:DATE?
<String> = "YY/MM/DD" (YY = year, MM
= month, DD = day)
:SYSTEM:DATE "11/01/01"
Example
:SYSTEM:DATE? -> "11/01/01"
Description For year, enter the last two digits of the year
according to the Gregorian calendar.
:SYSTem:DFLow:FREQuency
Function Sets or queries the frequency data display format
when a low frequency (or no frequency) input is
applied.
:SYSTem:DFLow:FREQuency {0|ERRor}
Syntax
:SYSTem:DFLow:FREQuency?
:SYSTEM:DFLOW:FREQUENCY ERROR
Example
:SYSTEM:DFLOW:FREQUENCY? ->
:SYSTEM:DFLOW:FREQUENCY ERROR
:SYSTem:DFLow:MOTor
Function Sets or queries the motor data display format
when no pulse is applied.
:SYSTem:DFLow:MOTor {0|ERRor}
Syntax
:SYSTem:DFLow:MOTor?
:SYSTEM:DFLOW:MOTOR ERROR
Example
:SYSTEM:DFLOW:MOTOR? ->
:SYSTEM:DFLOW:MOTOR ERROR
Description This is only valid on models with the motor
evaluation function (/MTR) option.
:SYSTem:DPOint
Function Sets or queries the type of decimal point that is
used when saving various data in ASCII format
(CSV).
:SYSTem:DPOint {PERiod|COMMa}
Syntax
:SYSTem:DPOint?
:SYSTEM:DPOINT PERIOD
Example
:SYSTEM:DPOINT? ->
:SYSTEM:DPOINT PERIOD
:SYSTem:ECLear
Function Clears error messages displayed on the screen.
:SYSTem:ECLear
Syntax
:SYSTEM:ECLEAR
Example
1
2
3
4
5
6
App
Index
5-97