YOKOGAWA WT1800 User Manual page 42

5.1 List of Commands
Command
INTEGrate Group
:INTEGrate?
:INTEGrate:ACAL
:INTEGrate:INDependent
:INTEGrate:MODE
:INTEGrate:QMODe?
:INTEGrate:QMODe[:ALL]
:INTEGrate:QMODe:ELEMent<x>
:INTEGrate:RESet
:INTEGrate:RTALl:{STARt|END}
:INTEGrate:RTIMe<x>?
:INTEGrate:RTIMe<x>:{STARt|END} Sets or queries the integration start or end time for real-time integration
:INTEGrate:STARt
:INTEGrate:STATe?
:INTEGrate:STOP
:INTEGrate:TIMer<x>
:INTEGrate:TMALl
:INTEGrate:WPTYpe?
:INTEGrate:WPTYpe[:ALL]
:INTEGrate:WPTYpe:ELEMent<x>
MEASure Group
:MEASure?
:MEASure:AVERaging?
:MEASure:AVERaging:COUNt
:MEASure:AVERaging[:STATe]
:MEASure:AVERaging:TYPE
:MEASure:DMeasure?
:MEASure:DMeasure:MODE
:MEASure:DMeasure:{SIGMA|SIGMB|
SIGMC}
:MEASure:EFFiciency?
:MEASure:EFFiciency:ETA<x>
:MEASure:EFFiciency:UDEF<x>
:MEASure:EVENt<x>?
:MEASure:EVENt<x>:EXPRession?
:MEASure:EVENt<x>:EXPRession:CO
NDition
:MEASure:EVENt<x>:EXPRession:IN
Verse
:MEASure:EVENt<x>:EXPRession:IT
EM
:MEASure:EVENt<x>:EXPRession:LI
Mit<x>
:MEASure:EVENt<x>:EXPRession:ST
Ring?
:MEASure:EVENt<x>:EXPRession:TY
PE
:MEASure:EVENt<x>:FLABel
:MEASure:EVENt<x>:NAME
:MEASure:EVENt<x>[:STATe]
5-10
Function
Queries all integration settings.
Sets or queries the on/off status of integration auto calibration.
Sets or queries the on/off status of independent element integration.
Sets or queries the integration mode.
Queries the electric current modes for electric current integration of all
elements.
Collectively sets the electric current mode for electric current integration of all
elements.
Sets or queries the electric current mode for electric current integration of the
specified element.
Resets the integrated value.
Collectively sets the integration start or end time of all elements for real-time
integration mode.
Queries the integration start and end times for real-time integration mode.
mode.
Starts integration.
Queries the integration status.
Stops integration.
Sets or queries the integration timer value.
Collectively sets the integration timer of all elements.
Queries the watt-hour integration methods for each polarity (WP+/WP–) of all
elements.
Collectively sets the watt-hour integration method for each polarity (WP+/
WP–) of all elements.
Sets or queries the watt-hour integration method for each polarity (WP+/
WP–) of the specified element.
Queries all computation settings.
Queries all averaging settings.
Sets or queries the averaging coefficient.
Sets or queries the on/off status of averaging.
Sets or queries the averaging type.
Queries all delta computation settings.
Sets or queries the voltage or current mode that is used in delta computation. 5-70
Sets or queries the delta computation mode for wiring unit ΣA, ΣB, or ΣC.
Queries all efficiency computation settings.
Sets or queries the efficiency equation.
Sets or queries the user-defined parameters used in the efficiency equation. 5-71
Queries all the settings of the specified user-defined event.
Queries all the settings of the specified user-defined event's expression.
Sets or queries the specified user-defined event's expression (compound
condition type).
Sets or queries the on/off status of the logic inversion of the specified user-
defined event's expression (compound condition type).
Sets or queries the target item of the specified user-defined event's
expression (range-defined type).
Sets or queries the range of the specified user-defined event's expression
(range-defined type).
Queries the specified user-defined event's expression as a string.
Sets or queries the specified user-defined event's expression type.
Sets or queries the string that is displayed when the specified user-defined
event's condition is not met.
Sets or queries the specified user-defined event's name.
Sets or queries the on/off status of the specified user-defined event.
Page
5-67
5-67
5-67
5-67
5-67
5-67
5-67
5-67
5-67
5-68
5-68
5-68
5-68
5-69
5-69
5-69
5-69
5-69
5-69
5-70
5-70
5-70
5-70
5-70
5-70
5-70
5-71
5-71
5-71
5-71
5-71
5-71
5-72
5-72
5-72
5-72
5-72
5-72
5-72
IM WT1801-17EN