YOKOGAWA WT1800 User Manual page 89

5.13 INPut Group
The commands in this group deal with the measurement conditions of the input elements.
You can make the same settings and queries that you can make by pressing the keys in the measurement condition
setup area (the area outlined in blue), SCALING, LINE FILTER, FREQ FILTER (SHIFT+LINE FILTER), SYNC
SOURCE, NULL, and NULL SET (SHIFT+NULL) on the front panel.
:INPut?
Function Queries all input element settings.
:INPut?
Syntax
[:INPut]:CFACtor
Function Sets or queries the crest factor.
[:INPut]:CFACtor {<NRf>}
Syntax
[:INPut]:CFACtor?
<NRf> = 3, 6
:INPUT:CFACTOR 3
Example
:INPUT:CFACTOR? ->
:INPUT:CFACTOR 3
[:INPut]:CURRent?
Function Queries all electric current measurement settings.
[:INPut]:CURRent?
Syntax
[:INPut]:CURRent:AUTO?
Function Queries the electric current auto range on/off
statuses of all elements.
[:INPut]:CURRent:AUTO?
Syntax
[:INPut]:CURRent:AUTO[:ALL]
Function Collectively sets the electric current auto range
on/off status of all elements.
[:INPut]:CURRent:AUTO[:ALL]
Syntax
{<Boolean>}
:INPUT:CURRENT:AUTO:ALL ON
Example
[:INPut]:CURRent:AUTO:ELEMent<x>
Function Sets or queries the electric current auto range
on/off status of the specified element.
[:INPut]:CURRent:AUTO:
Syntax
ELEMent<x> {<Boolean>}
[:INPut]:CURRent:AUTO:ELEMent<x>?
<x> = 1 to 6 (element)
:INPUT:CURRENT:AUTO:ELEMENT1 ON
Example
:INPUT:CURRENT:AUTO:ELEMENT1? ->
:INPUT:CURRENT:AUTO:ELEMENT1 1
IM WT1801-17EN
[:INPut]:CURRent:
AUTO:{SIGMA|SIGMB|SIGMC}
Function Collectively sets the electric current auto range
on/off status of all the elements that belong to the
specified wiring unit (ΣA, ΣB, or ΣC).
[:INPut]:CURRent:
Syntax
AUTO:{SIGMA|SIGMB|SIGMC} {<Boolean>}
:INPUT:CURRENT:AUTO:SIGMA ON
Example
Description SIGMA, SIGMB, or SIGMC is invalid if the wiring
system setting ([:INPut]:WIRing) is made in such
a way that the corresponding wiring unit (ΣA, ΣB,
or ΣC) does not exist.
[:INPut]:CURRent:CONFig?
Function Queries the valid electric current ranges of all
elements.
[:INPut]:CURRent:CONFig?
Syntax
[:INPut]:CURRent:CONFig[:ALL]
Function Collectively sets the valid electric current range of
all elements.
[:INPut]:CURRent:CONFig[:ALL] {ALL|
Syntax
<Current>[,<Current>][,
<Current>]...}
ALL = All ranges are valid.
• 50 A input elements
• When the crest factor is set to 3:
<Current> = 1 A, 2 A, 5 A, 10 A, 20 A, 50 A
• When the crest factor is set to 6:
<Current> = 500 mA, 1 A, 2.5 A, 5 A, 10 A,
25 A
• 5 A input elements
• When the crest factor is set to 3:
<Current> = 10 mA, 20 mA, 50 mA, 100 mA,
200 mA, 500 mA, 1 A, 2 A, 5 A
• When the crest factor is set to 6:
<Current> = 5 mA, 10 mA, 25 mA, 50 mA,
100 mA, 250 mA, 500 mA, 1 A, 2.5 A
:INPUT:CURRENT:CONFIG:ALL ALL
Example
:INPUT:CURRENT:CONFIG:ALL 50,10,5,1
Description In the parameters, list all the electric current
ranges that you want to enable. To enable all the
ranges, specify the parameter "ALL."
1
2
3
4
5
6
App
Index
5-57