1.3
Connecting to the Ethernet Interface
Connection Procedure
Connect a UTP (Unshielded Twisted-Pair) or STP (Shielded Twisted-Pair) cable that is connected to
a hub or other network device to the Ethernet port on the WT1800 rear panel.
WT1800
RJ-45 modular jack
Notes about Connections
• To connect the WT1800 to a PC, be sure to use straight cables and to connect through a hub or
router. Proper operation is not guaranteed for a one-to-one connection using a crossover cable.
• Use a network cable that supports the data rate of your network.
Note
For details on how to connect the WT1800 to a network, see section 19.1, "Connecting the WT1800 to a
Network" in the WT1800 User's Manual, IM WT1801-02EN.
IM WT1801-17EN
Hub or router that supports 1000BASE-T/100BASE-TX
UTP or STP cable
(straight cable)
Ethernet port
Controller
(PC or work station)
Network card
1
2
3
4
5
6
App
Index
1-3