YOKOGAWA WT1800 User Manual page 54

5.5 CURSor Group
:CURSor:TRENd:TRACe<x>
Function Sets or queries the target of the specified cursor
on the trend display.
:CURSor:TRENd:TRACe<x> {<NRf>}
Syntax
:CURSor:TRENd:TRACe<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 1 to 16 (T1 to T16)
:CURSOR:TREND:TRACE1 1
Example
:CURSOR:TREND:TRACE1? ->
:CURSOR:TREND:TRACE1 1
:CURSor:TRENd:{X<x>|Y<x>|DY}?
Function Queries the measured value of the specified
cursor on the trend display.
:CURSor:TRENd:{X<x>|Y<x>|DY}?
Syntax
X<x> = Trend time string of the
cursor position
(X1 = D+, X2 = Dx)
Y<x> = Y-axis value of the cursor
position
(Y1 = Y+, Y2 = Yx)
DY = Y-axis difference (DY) between
the cursors
:CURSOR:TREND:X1? ->
Example
"2010/01/01 12:34:56"
:CURSOR:TREND:Y1? -> 78.628E+00
Description If the trend cursor display is not turned on, the
following results will be returned.
For X<x>: "****/**/** **:**:**" will be returned.
For Y<x> and DY: NAN (Not A Number) will be
returned.
:CURSor:WAVE?
Function Queries all waveform display cursor measurement
settings.
:CURSor:WAVE?
Syntax
:CURSor:WAVE:LINKage
Function Sets or queries the on/off status of the cursor
position linkage on the waveform display.
:CURSor:WAVE:LINKage {<Boolean>}
Syntax
:CURSor:WAVE:LINKage?
:CURSOR:WAVE:LINKAGE OFF
Example
:CURSOR:WAVE:LINKAGE? ->
:CURSOR:WAVE:LINKAGE 0
:CURSor:WAVE:PATH
Function Sets or queries the cursor path on the waveform
display.
:CURSor:WAVE:PATH {MAX|MIN|MID}
Syntax
:CURSor:WAVE:PATH?
:CURSOR:WAVE:PATH MAX
Example
:CURSOR:WAVE:PATH? ->
:CURSOR:WAVE:PATH MAX
5-22
:CURSor:WAVE:POSition<x>
Function Sets or queries the position of the specified
cursor on the waveform display.
:CURSor:WAVE:POSition<x> {<NRf>}
Syntax
:CURSor:WAVE:POSition<x>?
<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 0 to 800
:CURSOR:WAVE:POSITION1 160
Example
:CURSOR:WAVE:POSITION1? ->
:CURSOR:WAVE:POSITION1 160
:CURSor:WAVE[:STATe]
Function Sets or queries the on/off status of the cursor
display on the waveform display.
:CURSor:WAVE[:STATe] {<Boolean>}
Syntax
:CURSor:WAVE:STATe?
:CURSOR:WAVE:STATE ON
Example
:CURSOR:WAVE:STATE? ->
:CURSOR:WAVE:STATE 1
:CURSor:WAVE:TRACe<x>
Function Sets or queries the target of the specified cursor
on the waveform display.
:CURSor:WAVE:TRACe<x> {U<x>|I<x>|
Syntax
SPEed|TORQue|AUX<x>}
:CURSor:WAVE:TRACe<x>?
TRACe<x>'s <x> = 1, 2, (1 = C1 +, 2
= C2 x)
U<x> and I<x>'s <x> = 1 to 6 (element)
AUX<x>'s <x> = 1 or 2 (AUX input
channel)
:CURSOR:WAVE:TRACE1 U1
Example
:CURSOR:WAVE:TRACE1? ->
:CURSOR:WAVE:TRACE1 U1
Description • SPEed and TORQue can only be selected
on models with the motor evaluation function
(/MTR) option.
• AUX<x> can only be selected on models with
the auxiliary input (/AUX) option.
:CURSor:WAVE:
{X<x>|DX|PERDt|Y<x>|DY}?
Function Queries the measured value of the specified
cursor on the waveform display.
:CURSor:WAVE:{X<x>|DX|PERDt|Y<x>|
Syntax
DY}?
X<x> = X-axis value of the cursor
position
(X1 = X+, X2 = Xx)
DX = X-axis difference (DX) between
the cursors
PERDt = Value of 1/DT (1/DX) between
the cursors
Y<x> = Y-axis value of the cursor
position
(Y1 = Y+, Y2 = Yx)
DY = Y-axis difference (DY) between
the cursors
:CURSOR:WAVE:Y1? -> 78.628E+00
Example
Description If the waveform cursor display is not turned on,
NAN (Not A Number) is returned.
IM WT1801-17EN