Numeric Group - YOKOGAWA WT1800 User Manual

5.17 NUMeric Group

The command in this group deal with numeric data output.
There are no front panel keys that correspond to the commands in this group. The commands in the DISPlay group
are used to make the same settings and queries as the NUMERIC key on the front panel.
:NUMeric?
Function Queries all numeric data output settings.
:NUMeric?
Syntax
:NUMeric:FORMat
Function Sets or queries the numeric data format.
:NUMeric:FORMat {ASCii|FLOat}
Syntax
:NUMeric:FORMat?
:NUMERIC:FORMAT ASCII
Example
:NUMERIC:FORMAT? ->
:NUMERIC:FORMAT ASCII
Description • The format of the numeric data that is output
varies depending on how this command is set.
The different formats are explained below.
(1) When the format is set to ASCii:
Physical values are output in <NR3>
format.(Only the elapsed integration time—
TIME—is output in <NR1> format.)
The data items are separated by commas.
(2) When the format is set to FLOat:
A header (for example, "#260" or "#3208") is
added in front of each numeric data block.
A physical value in IEEE single-precision
floating point (4-byte) format follows the
header.
The byte order of the data of each item is MSB
First.
• For the formats of each individual numeric data
item, see "Numeric Data Formats" at the end of
this group of commands (page 5-87).
:NUMeric:HSPeed?
Function Queries all numeric data output settings of the
high speed data capturing mode.
:NUMeric:HSPEED?
Syntax
Description • This command is only valid on models with
thehigh speed data capturing (/HS) option.
• The number of numeric data items output by
:NUMeric:HSPeed:ITEM<x> is determined by
:NUMeric:HSPeed:NUMber.
5-80
:NUMeric:HSPeed:CLEar
Function Clears high speed data capturing mode numeric
list data output items (sets the items to NONE).
:NUMeric:HSPeed:CLEar {ALL|
Syntax
<NRf>[,<NRf>]}
ALL = Clear all items
First <NRf> = 1 to 30 (the number of
the first item to clear)
Second <NRf> = 1 to 30 (the number
of the last item to clear)
:NUMERIC:HSPEED:CLEAR ALL
Example
Description • This command is only valid on models with
thehigh speed data capturing (/HS) option.
• If the second <NRf> is omitted, the output item
specified by the first <NRf> and all following
output items (up to number 30) are cleared.
:NUMeric:HSPeed:DELete
Function Deletes high speed data capturing mode numeric
list data output items.
:NUMeric:HSPeed:DELete {<NRf>
Syntax
[,<NRf>]}
First <NRf> = 1 to 30 (the number of
the first item to delete)
Second <NRf> = 1 to 30 (the number
of the last item to delete)
:NUMERIC:HSPEED:DELETE1 (Deletes
Example
ITEM1 and shifts ITEM2 and subsequent
items forward)
:NUMERIC:HSPEED:DELETE 1,3 (Deletes
ITEM1 to ITEM3 and shifts ITEM4 and
subsequent items forward)
Description • This command is only valid on models with
thehigh speed data capturing (/HS) option.
• The positions of deleted output items are
filled by the items that follow them, and empty
sections at the end are set to NONE.
• If the second <NRf> is omitted, only the output
item specified by the first <NRf> is deleted.
IM WT1801-17EN