Configuring The Wt1800 Ethernet Settings - YOKOGAWA WT1800 User Manual

1.4

Configuring the WT1800 Ethernet Settings

This section explains the following setting for remotely controlling the WT1800 via the Ethernet
interface:
• Network connection timeout setting
UTILITY Remote Control Menu
Press UTILITY, the Remote Control soft key, and then the Network soft key to display the
following screen.
Note
Only use one communication interface: GP-IB, USB, or Network. If you send commands simultaneously from
more than one communication interface, the WT1800 will not execute the commands properly.
TCP/IP Settings
To use the Ethernet interface, you must specify the following TCP/IP settings.
• IP address
• Subnet mask
• Default gateway
For instructions on how to specify these settings, see section 20.2, "Configuring TCP/IP Settings" in
the WT1800 User's Manual, IM WT1801-02EN.
1-4
Set the timeout
with the cursor keys.
IM WT1801-17EN