YOKOGAWA WT1800 User Manual page 56

5.6 DISPlay Group
:DISPlay:BAR:ITEM<x>:SCALing:
VERTical
Function Sets or queries the vertical scaling mode of the
specified bar graph.
:DISPlay:BAR:ITEM<x>:SCALing:
Syntax
VERTical {LINear|LOG}
:DISPlay:BAR:ITEM<x>:SCALing:
VERTical?
<x> = 1 to 3 (item number)
:DISPLAY:BAR:ITEM1:SCALING:
Example
VERTICAL LOG
:DISPLAY:BAR:ITEM1:SCALING:
VERTICAL? ->
:DISPLAY:BAR:ITEM1:SCALING:
VERTICAL LOG
Description This command is valid when the scaling mode of
the bar graph (:DISPlay:BAR:ITEM<x>:SCALing:
MODE) is set to MANual.
:DISPlay:BAR:ITEM<x>:SCALing:XAXis
Function Sets or queries the position of the X axis of the
specified bar graph.
:DISPlay:BAR:ITEM<x>:SCALing:
Syntax
XAXis {BOTTom|CENTer}
:DISPlay:BAR:ITEM<x>:SCALing:
XAXis?
<x> = 1 to 3 (item number)
:DISPLAY:BAR:ITEM1:SCALING:
Example
XAXIS BOTTOM
:DISPLAY:BAR:ITEM1:SCALING:XAXIS? ->
:DISPLAY:BAR:ITEM1:SCALING:
XAXIS BOTTOM
Description This command is valid when the scaling mode of
the bar graph (:DISPlay:BAR:ITEM<X>:SCALing:
MODE) is set to MANual and the vertical scaling
mode of the bar graph (:DISPlay:BAR:ITEM<x>:
SCALing:VERTical) is set to LINear.
:DISPlay:BAR:ORDer
Function Sets or queries the displayed starting and ending
harmonic orders of the bar graphs.
:DISPlay:BAR:ORDer {<NRf>,<NRf>}
Syntax
:DISPlay:BAR:ORDer?
First <NRf> = 0 to 490 (displayed
starting harmonic order)
Second <NRf> = 10 to 500 (displayed
ending harmonic order)
:DISPLAY:BAR:ORDER 1,100
Example
:DISPLAY:BAR:ORDER? ->
:DISPLAY:BAR:ORDER 1,100
Description • Set the starting harmonic order and then the
ending harmonic order.
• Set the ending harmonic order to a value
greater than or equal to that of the starting
harmonic order + 10.
5-24
:DISPlay:HSPeed?
Function Queries all high speed data capturing display
settings.
:DISPlay:HSPeed?
Syntax
Description The bar graph display is only available on models
with the high speed data capturing (/HS) option.
:DISPlay:HSPeed:COLumn?
Function Queries all column settings of the high speed
data capturing mode.
:DISPlay:HSPeed:COLumn?
Syntax
:DISPlay:HSPeed:COLumn:ITEM<x>
Function Sets or queries the specified column display item
of the high speed data capturing mode.
:DISPlay:HSPeed:COLumn:
Syntax
ITEM<x> {NONE|<Element>}
:DISPlay:HSPeed:COLumn:ITEM<x>?
<x> = 1 to 6 (column number)
<Element> = {<NRf>|SIGMa|SIGMB|SIGMC}
(<NRf> = 1 to 6)
:DISPLAY:HSPEED:COLUMN:ITEM1 1
Example
:DISPLAY:HSPEED:COLUMN:ITEM1? ->
:DISPLAY:HSPEED:COLUMN:ITEM1 1
:DISPlay:HSPeed:COLumn:NUMber
Function Sets or queries the number of columns of the
high speed data capturing mode.
:DISPlay:HSPeed:COLumn:
Syntax
NUMber {<NRf>}
:DISPlay:HSPeed:COLumn:NUMber?
<NRf> = 4,6
:DISPLAY:HSPEED:COLUMN:NUMBER 4
Example
:DISPLAY:HSPEED:COLUMN:NUMBER? ->
:DISPLAY:HSPEED:COLUMN:NUMBER 4
:DISPlay:HSPeed:COLumn:RESet
Function Resets the column display items to their default
values on the high speed data capturing mode.
:DISPlay:HSPeed:COLumn:RESet
Syntax
:DISPLAY:HSPEED:COLUMN:RESET
Example
:DISPlay:HSPeed:FRAMe
Function Sets or queries the on/off status of the high speed
data capturing mode's data section frame.
:DISPlay:HSPeed:FRAMe {<Boolean>}
Syntax
:DISPlay:HSPeed:FRAMe?
:DISPLAY:HSPEED:FRAME ON
Example
:DISPLAY:HSPEED:FRAME? ->
:DISPLAY:HSPEED:FRAME 1
Description This command performs the same setting as the
":DISPlay:NUMeric:FRAMe" command.
IM WT1801-17EN