YOKOGAWA WT1800 User Manual page 83

:HSPeed:MEASuring:{U<x>|I<x>}
Function Sets or queries the specified voltage or current
mode.
:HSPeed:MEASuring:{U<x>|I<x>} {RMS|
Syntax
MEAN|DC|RMEAN}
:HSPeed:MEASuring:{U<x>|I<x>}?
<x> = 1 to 6 (element)
:HSPEED:MEASURING:U1 RMS
Example
:HSPEED:MEASURING:U1? ->
:HSPEED:MEASURING:U1 RMS
:HSPeed:MEASuring:{UALL|IALL}
Function Sets all voltage or current modes at the same time.
:HSPeed:MEASuring:{UALL|IALL} {RMS|
Syntax
MEAN|DC|RMEAN}
:HSPEED:MEASURING:UALL RMS
Example
:HSPeed:POVer?
Function Queries the high speed data capturing peak over-
range information.
:HSPeed:POVer?
Syntax
:HSPEED:POVER? -> 0
Example
Description • Returns the peak over-range information (the
"Peak Over Status" that is displayed in the
middle of the screen) during capturing.
• The peak over-range information of each
element is mapped as shown below. For the
response, the sum of the values of each bit
is returned in decimal format. For example,
a response of 16 indicates that a peak over-
range is occurring at U3.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
- - - - Tq Sp I6 U6 I 5 U5 I 4 U4 I 3 U3 I 2 U2 I1 U1
Sp: Rotating speed or AUX1
Tq: Torque or AUX2
:HSPeed:RECord?
Function Queries all high speed data capturing settings for
saving data to files.
:HSPeed:RECord?
Syntax
:HSPeed:RECord:FILE?
Function Queries all settings related to the saving of
acquired data to files.
:HSPeed:RECord:FILE?
Syntax
Description The ":HSPeed:RECord:FILE:. . ." commands
perform the same settings and queries as the ":
STORe:FILE:. . ." commands. (Excluding the ":
STORe:FILE:CONVert:. . ." commands.)
IM WT1801-17EN
:HSPeed:RECord:FILE:ANAMing
Function Sets or queries the auto naming feature for
saving acquired numeric data to files.
:HSPeed:RECord:FILE:ANAMing {OFF|
Syntax
NUMBering|DATE}
:HSPeed:RECord:FILE:ANAMing?
:HSPEED:RECORD:FILE
Example
:ANAMING NUMBERING
:HSPEED:RECORD:FILE:ANAMING? ->
:HSPEED:RECORD:FILE
:ANAMING NUMBERING
:HSPeed:RECord:FILE:CDIRectory
Function Changes the directory that acquired numeric data
will be saved to.
:HSPeed:RECord:FILE
Syntax
:CDIRectory {<String>}
<String> = Directory name
:HSPEED:RECORD:FILE
Example
:CDIRECTORY "RECORD"
Description Specify ".." to move up to the parent directory.
:HSPeed:RECord:FILE:CONVert?
Function Queries all settings related to the conversion of
files of acquired numeric data into CSV format.
:HSPeed:RECord:FILE:CONVert?
Syntax
:HSPeed:RECord:FILE:CONVert:ABORt
Function Aborts the conversion of the specified file of
acquired numeric data to CSV format.
:HSPeed:RECord:FILE:CONVert:ABORt
Syntax
:HSPEED:RECORD:FILE:CONVERT:ABORT
Example
:HSPeed:RECord:FILE:CONVert:AUTO
Function Sets or queries the on/off status of the automatic
conversion of files of acquired numeric data to
CSV format.
:HSPeed:RECord:FILE:CONVert:
Syntax
AUTO {<Boolean>}
:HSPeed:RECord:FILE:CONVert:AUTO?
:HSPEED:RECORD:FILE:CONVERT:AUTO ON
Example
:HSPEED:RECORD:FILE:CONVERT:AUTO? ->
:HSPEED:RECORD:FILE:CONVERT:AUTO 1
:HSPeed:RECord:FILE:CONVert:EXECute
Function Converts the specified file of acquired numeric
data to CSV format.
:HSPeed:RECord:FILE:CONVert:
Syntax
EXECute {<String>}
<String> = File name
:HSPEED:RECORD:FILE:CONVERT:
Example
EXECUTE "RECORD1"
Description • Specify the file name without an extension.
• This command is an overlap command.
5.11 HSPeed Group
App
Index
5-51
1
2
3
4
5
6