YOKOGAWA WT1800 User Manual page 101

:INTEGrate:STOP
Function Stops integration.
:INTEGrate:STOP {[<NRf>][,<NRf>]
Syntax
[,<NRf>][,<NRf>][,<NRf>][,<NRf>]}
<NRf> = 1 to 6 (element)
:INTEGRATE:STOP (stops integration
Example
on all elements)
:INTEGRATE:STOP 1,2,3 (stops
integration on the specified
elements)
Description • When independent element integration
(:INTEGrate:INDependent) is set to ON (1),
you can use the parameters to specify which
elements to perform the operation on. If you
omit the parameters, the operation will be
performed on all the elements.
• When independent element integration
(:INTEGrate:INDependent) is set to OFF (0),
you cannot use the parameters to specify
elements.
:INTEGrate:TIMer<x>
Function Sets or queries the integration timer value.
:INTEGrate:TIMer<x> {<NRf>,<NRf>,
Syntax
<NRf>}
:INTEGrate:TIMer<x>?
<x> = 1 to 6 (element)
{<NRf>,<NRf>,<NRf>} = 0, 0, 0 to 10000, 0,
0
First <NRf> = 0 to 10000 (hours)
Second <NRf> = 0 to 59 (minutes)
Third <NRf> = 0 to 59 (seconds)
:INTEGRATE:TIMER1 1,0,0
Example
:INTEGRATE:TIMER1? -> :INTEGRATE:
TIMER1 1,0,0
Description When independent element integration
(:INTEGrate:INDependent) is set to OFF (0),
you can omit <x> (<x> = 1). The operation is
performed on all elements using element 1's
integration timer.
:INTEGrate:TMALl
Function Collectively sets the integration timer of all
elements.
:INTEGrate:TMALl {<NRf>,<NRf>,<NRf>}
Syntax
{<NRf>,<NRf>,<NRf>} = 0 , 0 , 0 to 10000, 0,
0
First <NRf> = 0 to 10000 (hours)
Second <NRf> = 0 to 59 (minutes)
Third <NRf> = 0 to 59 (seconds)
:INTEGRATE:TMALL 1,0,0
Example
:INTEGrate:WPTYpe?
Function Queries the watt-hour integration methods for
each polarity (WP+/WP–) of all elements.
:INTEGrate:WPTYpe?
Syntax
IM WT1801-17EN
:INTEGrate:WPTYpe[:ALL]
Function Collectively sets the watt-hour integration method
for each polarity (WP+/WP–) of all elements.
:INTEGrate:WPTYpe[:ALL]
Syntax
{CHARge|SOLD}
:INTEGRATE:WPTYPE:ALL CHARGE
Example
:INTEGrate:WPTYpe:ELEMent<x>
Function Sets or queries the watt-hour integration method
for each polarity (WP+/WP–) of the specified
element.
:INTEGrate:WPTYpe:
Syntax
ELEMent<x> {CHARge|SOLD}
:INTEGrate:WPTYpe:ELEMent<x>?
<x> = 1 to 6 (element)
CHARge = Charge-discharge
SOLD = Commercial power
:INTEGRATE:WPTYPE:ELEMENT1 CHARGE
Example
:INTEGRATE:WPTYPE:ELEMENT1? ->
:INTEGRATE:WPTYPE:ELEMENT1 CHARGE
Description Regardless of the independent element
integration setting (:INTEGrate:INDependent),
the WT1800 operates according to the integration
method of the specified element.
5.14 INTEGrate Group
5-69
1
2
3
4
5
6
App
Index