YOKOGAWA WT1800 User Manual page 93

[:INPut]:CURRent:SRATio:
{SIGMA|SIGMB|SIGMC}
Function Collectively sets the external current sensor
conversion ratios of all the elements that belong
to the specified wiring unit (ΣA, ΣB, or ΣC).
[:INPut]:CURRent:SRATio:
Syntax
{SIGMA|SIGMB|SIGMC} {<NRf>}
<NRf> = 0.0001 to 99999.9999
:INPUT:CURRENT:SRATIO:SIGMA 10
Example
Description SIGMA, SIGMB, or SIGMC is invalid if the wiring
system setting ([:INPut]:WIRing) is made in such
a way that the corresponding wiring unit (ΣA, ΣB,
or ΣC) does not exist.
[:INPut]:ESELect
Function Sets or queries the element whose measurement
range will be set.
[:INPut]:ESELect {<NRf>|ALL}
Syntax
[:INPut]:ESELect?
<NRf> = 1 to 6 (element)
:INPUT:ESELECT 1
Example
:INPUT:ESELECT? -> :INPUT:ESELECT 1
[:INPut]:FILTer?
Function Queries all input filter settings.
[:INPut]:FILTer?
Syntax
[:INPut]:FILTer:FREQuency?
Function Queries the frequency filters of all elements.
[:INPut]:FILTer:FREQuency?
Syntax
[:INPut]:FILTer:FREQuency[:ALL]
Function Collectively sets the frequency filter of all
elements.
[:INPut]:FILTer:FREQuency[:ALL]
Syntax
{OFF|<Frequency>}
OFF = Frequency filter off
<Frequency> = 100 Hz, 1 kHz (when the
line filter is on; cutoff frequency)
:INPUT:FILTER:FREQUENCY:ALL OFF
Example
IM WT1801-17EN
[:INPut]:FILTer:FREQuency:ELEMent<x>
Function Sets or queries the frequency filter of the
specified element.
[:INPut]:FILTer:FREQuency:
Syntax
ELEMent<x> {OFF|<Frequency>}
[:INPut]:FILTer:FREQuency:
ELEMent<x>?
<x> = 1 to 6 (element)
OFF = Frequency filter off
<Frequency> = 100 Hz, 1 kHz (when the
line filter is on; cutoff frequency)
:INPUT:FILTER:FREQUENCY:
Example
ELEMENT1 100HZ
:INPUT:FILTER:FREQUENCY:ELEMENT1? ->
:INPUT:FILTER:FREQUENCY:
ELEMENT1 100.0E+00
[:INPut]:FILTer:LINE?
Function Queries the line filters of all elements.
[:INPut]:FILTer:LINE?
Syntax
[:INPut]:FILTer[:LINE][:ALL]
Function Collectively sets the line filter of all elements.
[:INPut]:FILTer[:LINE][:ALL] {OFF|
Syntax
<Frequency>}
OFF = Line filter off
<Frequency> = 0.1 kHz to 100.0 kHz,
300 kHz, 1 MHz (when the line filter
is on; cutoff frequency)
:INPUT:FILTER:LINE:ALL OFF
Example
Description You can set the frequency between 0.1 kHz and
100.0 kHz with a resolution of 0.1 kHz.
[:INPut]:FILTer[:LINE]:ELEMent<x>
Function Sets or queries the line filter of the specified
element.
[:INPut]:FILTer[:LINE]:
Syntax
ELEMent<x> {OFF|<Frequency>}
[:INPut]:FILTer[:LINE]:
ELEMent<x>?
<x> = 1 to 6 (element)
OFF = Line filter off
<Frequency> = 0.1 kHz to 100.0 kHz,
300 kHz, 1 MHz (when the line filter
is on; cutoff frequency)
:INPUT:FILTER:LINE:ELEMENT1 0.5KHZ
Example
:INPUT:FILTER:LINE:ELEMENT1? ->
:INPUT:FILTER:LINE:
ELEMENT1 500.0E+00
Description You can set the frequency between 0.1 kHz and
100.0 kHz with a resolution of 0.1 kHz.
5.13 INPut Group
1
2
3
4
5
6
App
Index
5-61