YOKOGAWA WT1800 User Manual page 114

5.17 NUMeric Group
:NUMeric:HSPeed:PRESet
Function Presets the numeric data output item pattern of
the high speed data capturing mode.
:NUMeric:HSPeed:PRESet {DEFault|
Syntax
RECord}
DEFault = default
RECord = same settings as the file
output
:NUMERIC:HSPEED:PRESET DEFAULT
Example
Description • This command is only valid on models with
thehigh speed data capturing (/HS) option.
• For the default, see "(3) Preset Patterns for
High Speed Data Capturing Mode Numeric
Data Output Items" at the end of this group of
commands (page 5-91).
5-82
:NUMeric:HSPeed:VALue?
Function Queries the numeric data of high speed data
capturing mode.
:NUMeric:HSPeed:VALue? {<NRf>}
Syntax
<NRf> = 1 to 30 (item number)
When there are 100 data records
Example
captured in a single data update
interval:
• When <NRf> is specified:
:NUMERIC:HSPEED:VALUE? 1 ->
103.79E+00,103.26E+00, . . .
(omitted) . . .,103.53E+00
(U1[1],U1[2], . . . (omitted) . . .,
U1[100]:100 data entries)
• When <NRf> is omitted (when
:NUMeric:HSPeed:NUMber is set to 3):
:NUMERIC:HSPEED:VALUE? ->
103.79E+00,1.0143E+00,105.27E+00,
103.26E+00,1.0185E+00,105.17E+00,
. . . (omitted) . . .,103.53E+00,
1.0164E+00,105.23E+00
(U1[1],I1[1],P1[1],U1[2],I1[2],
P1[2], . . . (omitted) . . .,
U1[100],I1[100],P1[100]:300 = 3 ×
100 data entries)
• When:NUMeric:FORMat is set to FLOat:
:NUMERIC:HSPEED:VALUE? ->
#N (N-digit byte number; data byte
sequence)
Description • This command is only valid on models with the
high speed data capturing (/HS) option.
• The number of data records that were captured
in a single data update interval are output in
the order that they were captured.
• A single numeric data record contains the
following numeric data.
If <NRf> is omitted, the numeric data record
contains the numeric data of the items from
1 to the number specified by the :NUMeric:
HSPeed:NUMber command (up to 30 items).
If <NRf> is specified, the numeric data record
contains the single numeric data entry of
the specified item number, regardless of the
value set by the :NUMeric:HSPeed:NUMber
command.
• In ASCII format, numeric data entries and data
records are both separated by commas.
• For the formats of the individual numeric data
items that are output, see "Numeric Data
Formats" at the end of this group of commands
(page 5-87).
IM WT1801-17EN