Appendix 1 Error Messages - YOKOGAWA WT1800 User Manual

Appendix 1 Error Messages

Code Message
158 String data not allowed.
161 Invalid block data.
168 Block data not allowed.
171 Missing Right
172 Invalid expression.
178 Expression data not allowed.
181 Invalid outside macro definition.
Communication Execution Errors (200 to 299)
Code Message
221 Setting conflict.
222 Data out of range.
223 Too much data.
224 Illegal parameter value.
225 OverFlow.
226 Out Of Memory.
241 Hardware missing.
260 Expression error.
270 Macro error.
272 Macro execution error.
273 Illegal macro label.
275 Macro definition too long.
276 Macro recursion error.
277 Macro redefinition not allowed.
278 Macro header not found.
App-2
Corrective Action
Use a data type other than <string data>.
<Block data> cannot be used.
<Block data> cannot be used.
Equations cannot be used.
Equations cannot be used.
Equations cannot be used.
The WT1800 does not support the IEEE 488.2 macro
specifications.
Corrective Action
Check settings that are related to each other.
Check the ranges of the settings.
Check data byte lengths.
Check the ranges of the settings.
Keep program messages (including <PMT>) to 1024
bytes or less in length.
Keep program messages (including <PMT>) to 1024
bytes or less in length.
Check that the specified options are all installed.
Equations cannot be used.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
The WT1800 does not support the IEEE 488.2 macro
specifications.
Page
Chapter 5
4-7 and
chapter 5
4-7 and
chapter 5
—
Chapter 5
Chapter 5
—
Page
Chapter 5
Chapter 5
Chapter 5
Chapter 5
4-2
4-2
—
—
—
—
—
—
—
—
—
IM WT1801-17EN