YOKOGAWA WT1800 User Manual page 105

:MEASure:EVENt<x>:TLABel
Function Sets or queries the string that is displayed when
the specified user-defined event's condition is
met.
:MEASure:EVENt<x>:TLABel {<String>}
Syntax
:MEASure:EVENt<x>:TLABel?
<x> = 1 to 8 (Event1 to Event8)
<String> = Up to 6 characters
:MEASURE:EVENT1:TLABEL "True"
Example
:MEASURE:EVENT1:TLABEL? ->
:MEASURE:EVENT1:TLABEL "True"
:MEASure:FREQuency?
Function Queries all frequency measurement settings.
:MEASure:FREQuency?
Syntax
Description On models with the add-on frequency
measurement (/FQ) option, all input elements
can be measured simultaneously, so it is not
necessary to use this query.
:MEASure:FREQuency:ITEM<x>
Function Sets or queries the element whose frequency will
be measured.
:MEASure:FREQuency:ITEM<x> {U<x>|
Syntax
I<x>}
:MEASure:FREQuency:ITEM<x>?
ITEM<x>'s <x> = 1 to 3 (Freq.1 to
Freq.3)
U<x> and I<x>'s <x> = 1 to 6 (element)
:MEASURE:FREQUENCY:ITEM1 U1
Example
:MEASURE:FREQUENCY:ITEM1? ->
:MEASURE:FREQUENCY:ITEM1 U1
Description On models with the add-on frequency
measurement (/FQ) option, all input elements
can be measured simultaneously, so it is not
necessary to use this command to set the
element.
:MEASure:FUNCtion<x>?
Function Queries all the settings of the specified user-
defined function.
:MEASure:FUNCtion<x>?
Syntax
<x> = 1 to 20 (F1 to F20)
:MEASure:FUNCtion<x>:EXPRession
Function Sets or queries the equation of the specified user-
defined function.
:MEASure:FUNCtion<x>:
Syntax
EXPRession {<String>}
:MEASure:FUNCtion<x>:EXPRession?
<x> = 1 to 20 (F1 to F20)
<String> = Up to 50 characters
:MEASURE:FUNCTION1:
Example
EXPRESSION "WH(E1)/TI(E1)*3600"
:MEASURE:FUNCTION1:EXPRESSION? ->
:MEASURE:FUNCTION1:
EXPRESSION "WH(E1)/TI(E1)*3600"
IM WT1801-17EN
:MEASure:FUNCtion<x>:NAME
Function Sets or queries the name of the specified user-
defined function.
:MEASure:FUNCtion<x>:NAME {<String>}
Syntax
:MEASure:FUNCtion<x>:NAME?
<x> = 1 to 20 (F1 to F20)
<String> = Up to 8 characters
:MEASURE:FUNCTION1:NAME "F1"
Example
:MEASURE:FUNCTION1:NAME? ->
:MEASURE:FUNCTION1:NAME "F1"
:MEASure:FUNCtion<x>[:STATe]
Function Sets or queries the on/off status of the specified
user-defined function.
:MEASure:FUNCtion<x>[:
Syntax
STATe] {<Boolean>}
:MEASure:FUNCtion<x>:STATe?
<x> = 1 to 20 (F1 to F20)
:MEASURE:FUNCTION1:STATE ON
Example
:MEASURE:FUNCTION1:STATE? ->
:MEASURE:FUNCTION1:STATE 1
:MEASure:FUNCtion<x>:UNIT
Function Sets or queries the unit that is added to the
computation result of the specified user-defined
function.
:MEASure:FUNCtion<x>:UNIT {<String>}
Syntax
:MEASure:FUNCtion<x>:UNIT?
<x> = 1 to 20 (F1 to F20)
<String> = Up to 8 characters
:MEASURE:FUNCTION1:UNIT "W"
Example
:MEASURE:FUNCTION1:UNIT? ->
:MEASURE:FUNCTION1:UNIT "W"
Description This command has no effect on the computation
result.
:MEASure:MHOLd
Function Sets or queries the on/off status of the MAX
HOLD feature used in user-defined functions.
:MEASure:MHOLd {<Boolean>}
Syntax
:MEASure:MHOLd?
:MEASURE:MHOLD ON
Example
:MEASURE:MHOLD? ->
:MEASURE:MHOLD 1
Description • The MAX HOLD operation starts when the
MAX HOLD feature is specified by a user-
defined function and :MEASure:MHOLd is set
to ON.
• When :MEASure:MHOLd is set to OFF, the
MAX HOLD operation ends, and the MAX
HOLD value becomes "no data."
• If :MEASure:MHOLd is set to ON after having
already been set to ON before, the MAX HOLD
value is reset, and the MAX HOLD operation
starts again.
• For information about specifying the MAX
HOLD feature, see the features guide, IM
WT1801-01EN.
5.15 MEASure Group
Index
5-73
1
2
3
4
5
6
App