YOKOGAWA WT1800 User Manual page 69

:DISPlay:WAVE:TRIGger?
Function Queries all trigger settings.
:DISPlay:WAVE:TRIGger?
Syntax
:DISPlay:WAVE:TRIGger:LEVel
Function Sets or queries the trigger level.
:DISPlay:WAVE:TRIGger:LEVel {<NRf>}
Syntax
:DISPlay:WAVE:TRIGger:LEVel?
<NRf> = –100.0 to 100.0(%)
:DISPLAY:WAVE:TRIGGER:LEVEL 0
Example
:DISPLAY:WAVE:TRIGGER:LEVEL? ->
:DISPLAY:WAVE:TRIGGER:LEVEL 0.0
Description Set the value in terms of a percentage of the full
scale value displayed on the screen.
:DISPlay:WAVE:TRIGger:MODE
Function Sets or queries the trigger mode.
:DISPlay:WAVE:TRIGger:MODE
Syntax
{AUTO|NORMal|OFF}
:DISPlay:WAVE:TRIGger:MODE?
:DISPLAY:WAVE:TRIGGER:MODE AUTO
Example
:DISPLAY:WAVE:TRIGGER:MODE? ->
:DISPLAY:WAVE:TRIGGER:MODE AUTO
Description If the waveform display is enabled and the trigger
mode is set to Auto or Normal, the data update
interval depends on the trigger operation.
:DISPlay:WAVE:TRIGger:SLOPe
Function Sets or queries the trigger slope.
:DISPlay:WAVE:TRIGger:SLOPe
Syntax
{RISE|FALL|BOTH}
:DISPlay:WAVE:TRIGger:SLOPe?
:DISPLAY:WAVE:TRIGGER:SLOPE RISE
Example
:DISPLAY:WAVE:TRIGGER:SLOPE? ->
:DISPLAY:WAVE:TRIGGER:SLOPE RISE
:DISPlay:WAVE:TRIGger:SOURce
Function Sets or queries the trigger source.
:DISPlay:WAVE:TRIGger:SOURce
Syntax
{U<x>|I<x>|EXTernal}
:DISPlay:WAVE:TRIGger:SOURce?
<x> = 1 to 6 (element)
EXTernal = External trigger input (Ext
Clk)
:DISPLAY:WAVE:TRIGGER:SOURCE U1
Example
:DISPLAY:WAVE:TRIGGER:SOURCE? ->
:DISPLAY:WAVE:TRIGGER:SOURCE U1
IM WT1801-17EN
:DISPlay:WAVE:{U<x>|I<x>|SPEed|
TORQue|AUX<x>}
Function Sets or queries the on/off status of the voltage,
current, rotating speed, torque, or auxiliary signal
waveform display.
:DISPlay:WAVE:{U<x>|I<x>|SPEed|
Syntax
TORQue|AUX<x>} {<Boolean>}
:DISPlay:WAVE:{U<x>|I<x>|SPEed|
TORQue|AUX<x>}?
U<x> and I<x>'s <x> = 1 to 6 (element)
AUX<x>'s <x> = 1 or 2 (AUX input
channel)
:DISPLAY:WAVE:U1 ON
Example
:DISPLAY:WAVE:U1? ->
:DISPLAY:WAVE:U1 1
Description • SPEed and TORQue are only valid on models
with the motor evaluation function (/MTR)
option.
• AUX<x> is only valid on models with the
auxiliary input (/AUX) option.
:DISPlay:WAVE:VZoom?
Function Queries all waveform vertical zoom factor
settings.
:DISPlay:WAVE:VZoom?
Syntax
:DISPlay:WAVE:VZoom:{U<x>|I<x>}
Function Sets or queries the vertical zoom factor of the
specified element's voltage or current waveform.
:DISPlay:WAVE:VZoom:{U<x>|I<x>}
Syntax
{<NRf>}
:DISPlay:WAVE:VZoom:{U<x>|I<x>}?
<x> = 1 to 6 (element)
<NRf> = 0.1 to 100
:DISPLAY:WAVE:VZOOM:U1 1
Example
:DISPLAY:WAVE:VZOOM:U1? ->
:DISPLAY:WAVE:VZOOM:U1 1.00
Description For details on the available zoom factors, see the
features guide, IM WT1801-01EN.
:DISPlay:WAVE:VZoom:{UALL|IALL}
Function Collectively sets the vertical zoom factor for the
voltage or current waveforms of all elements.
:DISPlay:WAVE:VZoom:{UALL|IALL}
Syntax
{<NRf>}
<NRf> = 0.1 to 100
:DISPLAY:WAVE:VZOOM:UALL 1
Example
Description For details on the available zoom factors, see the
features guide, IM WT1801-01EN.
5.6 DISPlay Group
1
2
3
4
5
6
App
Index
5-37