Chapter 5 Smart Access Anywhere
Displaying the instrument's user interface
To test your connection
1
On your workstation, launch the Smart Access Anywhere utility.
2
Select Test connection.
The test automatically launches.
3
To display connection log details in real time, select the See full logs button.
The connection log appears, and provides the following information:
–
–
4
After analyzing the results, do one of the following:
–
–
Launching the utility on your workstation
After you establish a connection to your test instrument, you can launch the Smart
Access Anywhere utility to update your instrument.
1
On your workstation, go to the directory where you installed the utility, then double
click SmartAccessAnywhere.exe.
The utility opens.
2
Enter the access code that was provided to you in the field provided on the upper
part of the screen.
3
Click Connect to validate the code.
The Smart Access Anywhere screen appears.
NOTE:
After upgrading or rebooting a remote instrument, please wait at least two
minutes before re-establishing the link between your workstation and the test
instrument.
Displaying the instrument's user interface
After you launch the utility on your workstation, you can display the remote instrument's
user interface on your workstation's display.
To display the instrument's user interface
•
On the Introduction page, click Remote Screen.
The user interface for the instrument appears on your workstation's display.
Page 148
Upload and Download speed (in Kbyte/s) from Device to server.
Latency between Device and server (in ms).
Select the Clear test results button to delete the current table, and retest the
connection if desired.
If connection is deemed to be valid, enter the access code and establish
connection.
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
March 2018