Appendix A Specifications
CSAM specifications
Table 169 CSAM in 8000v2
Item
Input, nominal range
Output
Battery Specifications
To ensure the maximum operating time is obtained while testing using the CSAM, if you
are not using the power adapter, be certain to install two batteries in the 6000Av2 or
8000v2. Different tests deplete the batteries at different rates; therefore battery life can
not be guaranteed for any specific length of time. Always use the power supply when
multiple modules are attached to an 8000v2.
Table 170 Battery Specifications
Item
Battery Life in 6000Av2
Battery Life in 8000Av2
(one CSAM in DMCv2)
Optical Specifications
The CSAM has three physical optical ports — CFP2, QSFP+, and SFP+.
CFP2 Interface
The optical specifications for the CFP2 module interface in the CSAM are detailed in
Table
171.
Table 171 CFP Optical Module Interface Specifications
Module
CFP2, hot-pluggable
QSFP+ Interface
The optical specifications for the QSFP+ interface in the CSAM are detailed in
Table
172.
Table 172 QSFP+ Optical Module Interface Specifications
Module
QSFP+, hot-pluggable
Page 240
Specification
compliant with CFP MSA, CFP2 Hardware Specification
Rev 1.0, E 802.3ba
Specification
compliant with QSFP+ MSA(SFF-8436), IEEE P802.3ba
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
220W power supply
100-240 V. 50-60 Hz, 0.4A
20 V, 11A, 220W max power
Specification
45 minutes minimum
1 hour 30 minutes minimum
March 2018