Receiver (E4 Circuits); Transmitter (E4 Circuits) - Viavi T-BERD MTS 5800 Getting Started Manual

Appendix A Specifications
MSAM specifications
• Table 105 on page 208
receivers, transmitters, and frequency and level measurements.
• Table 108 on page 209
1 receivers, transmitters, and frequency and level measurements.

Receiver (E4 circuits)

Table 105
Table 105 E4 receiver specifications
Parameter
Connector
Bit rate
Impedance
Range

Transmitter (E4 circuits)

Table 106
Table 106 E4 transmitter specifications
Parameter
Connector
Bit rate
Line coding
Tx clock
(Timing)
Frequency offset
Pulse
Impedance
Page 208
through
through
lists specifications for the receiver when running E4 applications.
Specification
One BNC
139.264 Mbps
Nominal 75 Ω at 70 MHz unbalanced
– Term: 0 to 12 dB due to cable loss at 70 MHz, from a
nominal signal
– PMP: -20 dB due to resistive loss in addition to 0 to 12 dB
due to cable loss at 70 MHz, from a nominal signal
lists specifications for the transmitter when running E4 applications.
Specification
One BNC
139.264 Mbps
CMI
– Internal reference clock with accuracy ±1.5 ppm,
±1 ppm per year aging
– Recovered from E4 Rx
– External from BITS, SETS, or CLOCK
±50 ppm, in 1 ppm steps
Nominal 1.0 Vpp Complies with ITU-T G.703 (11/01)
Nominal 75 Ω
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Table 107 on page 209
Table 110 on page 210
list specifications for E4
list specifications for STM-
March 2018