Setup/Results; Menu Keys; Test Bar - Viavi T-BERD MTS 5800 Getting Started Manual

Chapter 3 Getting Started
Navigating the user interface

Setup/Results

The top key (Setup/Results) is used to toggle between the Setup screens and the Main
(Result) screen. When the Main screen is displayed, the Setup key appears; when the
setup screens are displayed, the Results key appears. For descriptions of setup
parameters and test results, refer to the testing manual for your instrument.
A Restart soft key is also provided which allows you to restart a test (and clear results).
Additional soft keys appear when appropriate for the selected test application which
allow you to run a variety of scripts designed to simplify testing.

Menu Keys

The seven menu keys located on the right side of the front panel perform the same
functions as the softkeys immediately to their left on the graphical user interface. If your
unit does not have a touch screen, use these buttons to access the setup screens,
restart tests, and perform other functions specific to your test application.

Test Bar

The Test Bar displays the current test application selected on the unit. For example, if
you selected the Layer 4 Multiple Streams application for a 10GigE LAN circuit, the
following appears in the Test Bar:
10GigE LAN Layer 4 Streams Term
If your instrument is configured with two ports for a particular rate, the currently selected
port also appears at the beginning of the text.
Page 64
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016 March 2018