Viavi T-BERD MTS 5800 Getting Started Manual page 120

Chapter 4 Basic Testing
Preparing to test
Figure 60 GPS Connection Diagram - CSAM
2 Connect the ToD signal between the GPS receiver and the instrument.
–
–
–
Page 96
For an 8000v1, connect the DB9-DB9 cable from the "Time Port" on the GPS
receiver to the DB9 connector on the T-BERD ⁄ MTS 8000, 6000A, and 5800
(see Figure 56 on page 94
For a 5800v1, connect the DB9 to RJ-45 cable from the "Time Port" on the
GPS receiver to the RJ-45connector on the 5800 (see
For a 5800v2, 6000A or 8000v2, connect the DB9 to USB cable from the
"Time Port" on the GPS receiver to the USB port on the 6000A or 8000 (see
Figure 55 on page 93,
Figure 60 on page 96,
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
or Figure 62 on page
Figure 57 on page 94,
Figure 61 on page 97, or
97).
Figure 58 on page
Figure 59 on page 95,
Figure 63 on page 97).
March 2018
95).