Exploring The Sc 4800 And T-Berd / Mts 5800; Smart Class 4800 - Viavi T-BERD MTS 5800 Getting Started Manual

To discuss a specific configuration or to order accessories for your 5800 or 4800,
contact Viavi Customer Care or your regional sales office. Contact information for
regional sales headquarters is provided on the back cover of this manual. You can also
contact Viavi through the company web site, www.viavisolutions.com.

Exploring the SC 4800 and T-BERD / MTS 5800

Smart Class 4800

The connector panels on SC 4800 and 4800P have one 10/100/1000 port and one
SFP+ port. SC 4800P has an additional DS1/E1 port.
Figure 3
March 2018
NOTE:
Some configurations also require you to purchase and install certain testing
options; others require specific hardware connectors to connect to circuits
for testing. For example, if your instrument does not have a connector
designed to support 1GigE Optical testing, you can not transmit and ana-
lyze a signal or traffic over a 1GigE circuit. OTDR testing and testing using
GNSS timing requires the connection of supporting OTDR and TEM mod-
ules or an internal GNSS receiver.
You can quickly determine whether or not your instrument supports certain
applications by exploring the technologies, rates, and test modes presented
on the Test menu and by reviewing the settings available when you config-
ure a test.
SC 4800 connector panel
T-BERD/MTS/SC Getting Started Guide
22046561, Rev. 016
Chapter 1 Overview
About the T-BERD / MTS 5800 and SC 4800
Page 11