Receiver (Stm-1E Circuits); Transmitter (Stm-1E Circuits) - Viavi T-BERD MTS 5800 Getting Started Manual

Appendix A Specifications
T-BERD / MTS 5800 and Smart Class 4800 specifications
Table 38 E4 frequency and level measurement specifications (Continued)
Parameter
Level Vpp

Receiver (STM-1e circuits)

Table 39
Table 39 STM-1e receiver specifications
Parameter
Connector
Bit rate
Impedance
Range

Transmitter (STM-1e circuits)

Table 40
Table 40 STM-1e transmitter specifications
Parameter
Connector
Bit rate
Line coding
Tx clock
(Timing)
Frequency offset
Pulse
Impedance
Page 174
Specification
– Range: 1.4 V to 0.01 V
– Resolution: 0.01 V
– Accuracy: ±0.02 V ±10%
lists specifications for the receiver when running STM-1e applications.
Specification
For 5800 v1 and v2, one BNC (RX1).
For 5800-100G and 5882, one HD-BNC (RX1).
155.52 Mbps
Nominal 75 Ω at 78 MHz unbalanced
Term: 0 to 12.7 dB due to cable loss at 78 MHz, from a
nominal signal
PMP: -20 dB due to resistive loss in addition to 0 to 12.7 dB
due to cable loss at 70 MHz, from a nominal signal
lists specifications for the transmitter when running STM-1e applications.
Specification
For 5800 v1 and v2, one BNC (TX/RX2); used as transmit-
ter only. For 5800-100G and 5882, one HD-BNC TX/(RX2);
used as transmitter only.
155.52 Mbps
CMI
– Internal reference clock with accuracy ±1.5 ppm, ±1 ppm
per year aging
– Recovered from STM-1e RX1
– External from BITS, SETS, or CLOCK
±50 ppm, in 1 ppm steps
Nominal 1.0 Vpp Complies with ITU-T G.703 (11/01)
Nominal 75 Ω
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016 March 2018