Generating Reports Automatically - Viavi T-BERD MTS 5800 Getting Started Manual

The unit sends the report to the printer.

Generating reports automatically

You can set up your instrument to automatically generate reports at specific intervals.
When you set up automatic reports, you can specify a suffix to append to each report,
indicate the file format for the reports, and select the content for automatically gener-
ated reports.
To setup your module to generate reports automatically
1 From the menu bar, select Reports > Automatic Reports.
The Automatic Report Settings screen appears.
2 Select the Enable automatic reports check box.
3 If you want to restart the test after an automatic report is generated, select the
corresponding check box.
NOTE:
When running automated scripts, tests will not restart automatically after
reports are generated.
ALERT:
If you are running two tests when your instrument is configured to automati-
cally generate reports and restart after the reports are generated, both tests
will restart.
4 Using the keypads and arrows provided, specify the reporting period in hours and
minutes.
5 In Mode, specify whether you'd like the module to overwrite the previous auto-
matic report each time it generates an automatic report, or create a new, separate
report file.
6 By default, "AutoReport" is appended to the end of the filename of each automati-
cally generated report. If you'd like to use a different suffix, in Report Name, type a
new suffix.
7 In Report Format, select PDF, CSV, Text, HTML, or XML.
8 Select Choose Contents, and then expand each of the following report informa-
tion groups by selecting the plus sign to the left.
–
–
–
–
–
–
March 2018
User Info
Configuration Groups
Results Groups
Event Loggers
Histograms
Screenshots
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Chapter 4 Basic Testing
Creating and printing reports
Page 135