Battery Specifications; Transceiver And Adapter Specifications; Environmental Specifications; T-Berd / Mts 5800 And Sc 4800 Environmental Specifications - Viavi T-BERD MTS 5800 Getting Started Manual

Appendix A Specifications

Transceiver and adapter specifications

Battery specifications

To ensure the maximum operating time is obtained while testing using the DMC and
MSAMs, if you are not using the power adapter, be certain to install two batteries in the
battery module. Different tests deplete the batteries at different rates; therefore, when
performing more than one BER test, battery life can not be guaranteed for any specific
length of time. Do not power the unit using batteries if multiple DMCs or application
modules are attached. For detailed battery information, refer to the 8000 Base Unit
User Manual.
Transceiver and adapter specifications
For detailed transceiver and adapter specifications, refer to your SFP, SFP+, XFP,
QSFP+, or CFP manufacturer's web site. Summarized information for inserted trans-
ceivers (such as the model number, supported wavelength, and supported interface) is
provided on the user interface (GUI).
If you are not certain whether you are using a Viavi recommended transceiver, contact
your local Viavi representative, or review the list of Viavi Recommended Optics that
shipped with the transceiver.

Environmental specifications

Refer to the following sections for environmental specifications:
• "T-BERD / MTS 5800 and SC 4800 environmental specifications" on page 242
• "MSAM environmental specifications" on page 243

T-BERD / MTS 5800 and SC 4800 environmental specifications

Table 176
4800. Operating temperature and humidity are provided below; for storage temperature
and humidity, see
Table 176 T-BERD / MTS 5800 and SC 4800 Environmental specifications
Item 5800 v1 & v2, 5882, 4800/
4800P
Operating 32°F to 122°F (0°C to +50°C)
Temperature Note: For maximum battery
capacity and runtime, limit
charge and discharge tem-
perature of the battery to
40°C (104°F).
Operating 10% to 90% relative humidity,
non-condensing
Humidity
Page 242
lists the environmental characteristics for the T-BERD / MTS 5800 and SC
"Storing the instrument" on page
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
262.
5800-100G
Dual 100GE: 0°C to +40°C;
Dual 10GE: 0°C to +50°C;
the same
March 2018