Accessing Test Reports Remotely; Exporting Reports - Viavi T-BERD MTS 5800 Getting Started Manual

Accessing test reports remotely

Using FTP, you can view, print, or save the test reports on your unit from a remote work-
station.
NOTE:
•
•
For details on locking the screen or specifying the system's security mode,
refer to the base unit manual for your instrument.
To access test reports using FTP
1 Launch your web browser, and then go to the following address:
ftp://xxx.xxx.xxx.xxx/disk/
where xxx.xxx.xxx.xxx represents the static or DHCP assigned IP address of
the Base unit.
A log on screen appears.
2 Do the following:
a
b
c
The bert directory (folder) appears in your browser window.
3 Open the bert directory, and then open the reports directory.
The reports that are stored on your unit appear.
4 Select, and then save the report to a directory on your workstation, or simply open
the report and view it remotely.

Exporting reports

After generating a report, you can export the report file to a USB memory key. Two USB
slots are provided on the top panel of your base unit.
To export a report to a USB memory key
1 Insert a USB memory key into one of the two slots provided on the top panel of
the base unit.
2 On the Menu Bar, select Reports > Export Report to USB.
March 2018
Verify that your system's Security Mode is set to Standard. You cannot
access the test reports remotely if the mode is set to Enhanced.
When using your unit remotely, it is helpful to lock the screen to prevent
other users from disrupting your testing.
In User name, do one of the following:
- If you are using an MSAM, enter t-berd6000 or mts6000 using lower
case characters.
In Password, enter acterna using lower case characters.
Select Log On.
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Chapter 4 Basic Testing
Creating and printing reports
Page 137