Menu Bar; Soft Keys - Viavi T-BERD MTS 5800 Getting Started Manual

For descriptions of the physical control buttons on the front panel of the base unit, refer
to the 8000 Base Unit User Manual or the 6000A Base Unit User Manual.

Menu Bar

The menu bar provides the following menus:
Test
Use the options listed on the Test menu to select your test application.
For example, to transmit patterns in a STS-48c Bulk BERT payload over an OC-48
circuit, select:
Test> SONET> OC-48 > STS-48c Bulk BERT > Terminate
View
Use the options listed on the View menu to change the format of the Main screen.
Options are provided which allow you to change the result layout and hide or display a
variety of items on the Main screen, such as the Message bar, LED panel, Signal Struc-
ture (graphical display), and the Actions panel. An option is also available which allows
you to toggle between tests running on different ports.
Reports
Use the options on the Reports menu to create, view, and export custom reports for
your module. You can also enable and configure automatic reports and test restarts
after automatic report generation using the Automatic Reports option.
Tools
Use the options on the Tools menu to import or export saved test configurations, set up
your module to emulate the FST-2000 TestPad or ANT platform LEDs, and to activate
new test options on your module. The Clear History option clears all historical LEDs.
Help
Use the Help menu to launch a help system with each of the topics discussed in the
testing manual, or to view signal connections.

Soft keys

The soft keys located on the right side of the graphical user interface provide quick
access to setup screens and the result display.
March 2018
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Chapter 3 Getting Started
Navigating the user interface
Page 63