Storing The Instrument; Environmental Specifications; Shipping The Your Instrument; Removing The Component - Viavi T-BERD MTS 5800 Getting Started Manual

Appendix C Storage and Shipment

Storing the instrument

Storing the instrument
When the instrument is not in use, it can be stored. You should follow the criteria below
when storing the Dual Module Carrier, Transport Module, CSAM, MSAM, T-BERD/MTS
5800 and SC 4800.
Refer to
guidelines related to battery storage.

Environmental specifications

The T-BERD/MTS 5800, SC 4800, and DMC should be stored according to the envi-
ronmental specifications listed in
Table 178 T-BERD/MTS 5800, SC 4800 and DMC storage specifications
Item
Storage Temperature
Humidity at 86°F (30°C)
Shock/drop height (non-operat-
ing)
The CSAM, MSAM, and PIMs should be stored according to the environmental speci-
fications listed in
Table 179 CSAM, MSAM, and PIM storage specifications
Item
Storage Temperature
Humidity at 86°F (30°C)
Shock/drop height (non-operat-
ing)

Shipping the your instrument

If you will be shipping the instrument, you should follow the guidelines below.

Removing the component

If you are returning the Dual Module Carrier, Transport Module, and MSAM only (rather
than the entire assembly), remove the component before shipping. For instructions,
Chapter 2 "Assembling Your
Page 262
""Maintaining the T-BERD/MTS 5800 and SC 4800 batteries" on page
Table 179.
Instrument".
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Table 178.
Description
-4°F to 140°F (-20°C to +60°C)
10% to 95% relative humidity, non-condensing
Meets requirements specified in IEC 721-3-7,
2nd Ed. for Class 7M3 products.
Description
-4°F to 140°F (-20°C to +60°C)
10% to 95% relative humidity, non-condensing
As published in the 6000A Base Unit
User Manual.
245" for
March 2018