Inspecting The Components For Damage; Accessories - Viavi T-BERD MTS 5800 Getting Started Manual

Chapter 1 Overview

Inspecting the components for damage

When unpacking the components, verify that all the items you ordered are included in
the package. Accessories may be shipped in a separate box.
After you unpack the components, you should inspect them for damage.
If undamaged, consider saving the box and packing materials in case you need to
repackage the components for shipment. For information about shipping equipment,
see Appendix C "Storage and Shipment"
Inspecting the components for damage
After you unpack the components, examine the connectors, ports, LEDs, and screen
for damage. Be sure to check the top, bottom, and front panels.
If you find damage, contact Viavi Customer Care at 1-844-GO-VIAVI. For the latest TAC
information, go to
nical-assistance.
For information about returning equipment, see
page 263.

Accessories

Table 4
Table 4
Accessory
Transceivers
Cables
TB/MTS-5800-
EPP
Page 6
http://www.viavisolutions.com/en/services-and-support/support/tech-
lists some of the accessories available for the instruments.

Accessories

Description
A variety of Viavi recommended SFP, SFP+, XFP, QSFP+,
QSFP28, and CFP transceivers (and adapters) are available
for testing optical circuits. Be certain to only use Viavi recom-
mended transceivers and adapters with your test instrument.
Each of the transceivers and adapters offered by Viavi as an
accessory is MSA compliant, and has been qualified for use
with your instrument. A list of Viavi recommended optics
shipped with your instrument or upgrade kit.
For a list of currently supported optics, contact your Viavi TAC
representative or your local Viavi sales office. Please refer to
your transceiver (or adapter) manufacturer's site for detailed
specifications.
A variety of Viavi-recommended optical cables are available for
connecting to the circuit you are testing.
The 5800 Ethernet Pairing Partner is an accessory used for
enhanced RJ-45 Ethernet cable diagnostics. It includes two
RJ-45 ports, one for completing a wire-map test with a TB/
MTS-5800 and the other for performing a shield ground conti-
nuity test with the RJ-45 connector on port 2 of a TB/MTS-
5882.
T-BERD/MTS/SC Getting Started Guide
22046561, Rev. 016
.
"Returning equipment to Viavi" on
March 2018