Job Manager Test Plan86 - Viavi T-BERD MTS 5800 Getting Started Manual

Chapter 3 Getting Started
Setting up the Job Manager
2 Specify the Customer Name, Job Number, Technician ID, and Location.
The report information is specified, and will be retained until you change it.
Job Manager Test Plan
The Test Plan section provides a list of planned test items associated with a job,
including the test type to be performed, reference information, and the pass/fail status.
If you load a test plan, you can select the test in the test list and the Launch button will
appear on the highlighted row. It will be enabled if the application is available on the
unit. Clicking the button will start the application and open its work flow screen. With the
test plan you can also automatically load the configuration and profile of the test.
Page 86
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016 March 2018