Viavi T-BERD MTS 5800 Getting Started Manual page 174

Chapter 5 Smart Access Anywhere
Displaying and modifying connection settings
2 Disconnect the session using the Disconnect button.
3 On the session screen, select the Network Settings icon.
The connection settings screen appears. The default connection is defined as
Smart-guess (default).
4 To modify the settings, select Forced settings, and then modify SSI tunnel port
and/or Internet proxy as needed.
The Internet proxy configuration is available exclusively if the port selected is
Alternative port (443) and if HTTPS packing is selected.
NOTE:
If the default parameters need to be modified, it is recommended you discuss
it with your local network administrator.
5 After configuring the settings, select Back to main page.
Page 150
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016 March 2018