Extracting The Software To A Usb Stick - Viavi T-BERD MTS 5800 Getting Started Manual

Appendix B Maintenance and Troubleshooting
Updating the software
To download the software
1 Using a browser, go to one of the following:
–
–
–
This will bring you to a landing page where you can download the latest self
extracting software upgrade file.
2 Click the bert-rpm-x.x.exe link for the software release you want to download
("x.x" represents the software release number).
3 Save the file to the desktop of your personal computer (PC).
The software is downloaded.
Reimage software URLs
http://5800.updatemyunit.net/archives/
http://5800v2.updatemyunit.net/archives/
http://5800-100g.updatemyunit.net/archives/
http://4800.updatemyunit.net/archives/
The reimage exe files are in the format: Base5800v2-Bert-x.x-Fiber-x-reimage.exe

Extracting the software to a USB stick

After downloading the software to your PC, it must be extracted to a USB stick.
To extract the files to a USB stick
1 Insert the USB memory stick into your PC.
2 Double-click the downloaded self-extracting file you saved to your desktop, then
click Run as prompted.
A dialog box appears asking for the location to extract the files.
3 Click Browse to navigate to and select the drive with the USB stick.
4 Click Extract.
The files are extracted to the USB stick. Do not remove the USB stick.
5 Using Windows Explorer, navigate to the drive with the USB stick, right-click on
the drive, and then select Eject.
6 Remove the USB stick from the PC.
The software is ready to be installed on your instrument using the USB stick.
Page 250
5800v1: http://5800.updatemyunit.net
5800v2: http://5800v2.updatemyunit.net
5800-100G: http://5800-100G.updatemyunit.net
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016 March 2018