SFP+ Interface
The optical specifications for the SFP+ interface in the CSAM are detailed in
Table 173 SFP+ Optical Module Interface Specifications
Module
SFP/SFP+, hot-pluggable
DMC specifications
Refer to the following sections for specifications for the DMC:
•
"Physical specifications" on page 241
•
"Power supply specifications" on page 241
•
"Battery specifications" on page 242
Physical specifications
The physical characteristics for the DMC are described in
Table 174 Module physical specifications
Item
Height
Width
Depth
Weight
Power supply specifications
Table 175
Table 175 Power supply specifications
Item
Input, nominal range
Maximum power draw
March 2018
Specification
compliant with MSA(SFF-8436), IEEE P802.3ba
Description
2.75 inches / 7 cm
12 inches / 30.48 cm
9.74 inches / 24.76 cm
DMC Only:
– 4.91 lbs / 2.22 kg
Combined (DMC, two MSAMs, 8000 base unit, two SFP PIMs,
and two XFP PIMs):
– 17.28 lbs / 7.83 kg
describes the specifications for the 150W power supply.
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
150W power supply
100-240 V. 50-60 Hz, 2A
150 watts
Appendix A Specifications
DMC specifications
Table
Table
174.
Page 241
173.