Sfp+ Connectors; About The Msam Assembly - Viavi T-BERD MTS 5800 Getting Started Manual
T-berd/mts/sc getting started guide
Hide thumbs
Also See for T-BERD MTS 5800:
- User manual (100 pages) ,
- Quick card (6 pages) ,
- Quick manual (5 pages)
Table of Contents
Advertisement
100GBASE-SR10 interfaces use double row MPO connectors with 24 fiber termina-
tions (as illustrated in
Figure 9
SFP+ connectors
Two SFP connectors allow you to connect the CSAM to a SONET, SDH,
1 Gigabit Ethernet, 100 FX, 100M, or 1, 2, or 4 Gigabit Fibre Channel circuit to transmit
and then analyze traffic during testing. If your instrument is configured and optioned to
do so, you can also analyze IP Video traffic on the Ethernet circuits. OTU-1 connections
are only supported on PORT# 1.
About the MSAM Assembly
The MSAM is used in combination with the T-BERD ⁄ MTS 6000A base unit, the
T-BERD ⁄ MTS 6000AV2 base unit or a T-BERD ⁄ MTS 8000 base unit with a DMC
chassis. Each MSAM is factory-configured to meet your unique testing requirements.
Figure 10 T-BERD ⁄ MTS 6000A with MSAM user interface
March 2018
Figure
9).
24-fiber MPO connector
T-BERD/MTS/SC Getting Started Guide
22046561, Rev. 016
Chapter 1 Overview
About the MSAM Assembly
Page 17
Advertisement
Table of Contents
Troubleshooting
