Optical Jitter And Wander Specifications - Viavi T-BERD MTS 5800 Getting Started Manual

Table 152 Optical interface specifications (Jitter and Wander applications) (Continued)
Item
Synchronization
Receiver specifications
Wavelength range
Rx offset acceptance
Sensitivity
Maximum input power
(destructive)
Fiber mode compatibility
Optical level measurement
Level measurement accuracy
Level measurement resolu-
tion
1. Remove the connector to clean the optical fiber.

Optical jitter and wander specifications

This section provides jitter and wander specifications for the MSAM:
• "Standards" on page 232
• "Jitter generator" on page 232
• "Jitter analyzer" on page 232
• "Automatic jitter measurements" on page 236
• "Wander generator" on page 236
• "Wander measurement" on page 237
• "Memory requirements" on page 239
March 2018
Description
See the Reference Clock Requirements published
in the testing guide that shipped with your unit.
1260 to 1360 nm
1430 to 1580 nm
+100 ppm
622/2488/2666 Mbps
– -8 to -28 dBm
155 Mbps
– -8 to -34 dBm
+0 dBm
OC3/OC12 connector
– multimode fiber
– singlemode fiber
OC48/OTU1 connector
– singlemode fiber
622/2488/2666 Mbps
– -8 to -28 dBm
155 Mbps
– -8 to -34 dBm
+3 dB
0.1 dB
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Appendix A Specifications
Jitter and Wander specifications
Page 231