Chapter 3 Getting Started
Navigating the user interface
4
After the icon is selected (highlighted in green), do one of the following to turn the
module ON.
–
–
The interface highlights the icon in yellow, and the MSAM or CSAM launches.
5
Press the RESULTS button.
The Viavi BERT MODULES STARTUP screen appears, indicating how far the
software load has progressed. When the load reaches 100%, the Main screen
appears.
The MSAM, or CSAM is launched.
NOTE:
After you launch the MSAM or CSAM, you can use the SYSTEM/HOME button
at any time to return to the System screen to change settings (such as the
screen saver). Pressing the SETUP or RESULTS button will then return you to
the corresponding application screen.
Navigating the user interface
The user interface lets you set up the instrument, configure tests, and display test
results. See
Figure 46 Main screen (Ethernet application)
Menu Bar
Message Bar
Quick Config
LED Panel
Actions Panel
Page 62
Use the touch screen to select the icon a second time.
Press the Enter key.
Figure
46.
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Battery
Group
Test
Indicator
Result Window
Category
Soft keys
March 2018