Appendix A Specifications
MSAM specifications
Table 79 V.36 DCE emulation specifications (Continued)
Specification
Sync Timing Mode
Tx Timing Sources
MIL-188-114 interface specifications
Specification MIL-188-114 describes a data communications interface that uses
DB-25 connector or DB-37 connectors using balanced or unbalanced MIL-188-114
amplifiers for all circuits. The MSAM supports testing of MIL-188-114 circuits in asyn-
chronous or synchronous mode.
Table 80 MIL-188-114 specifications
Specification
Timing modes
Maximum speed
Balanced
Unbalanced
Minimum output range
Rise/Fall times
Receiver minimum input sensitivity
Hysteresis
Supported circuits
Table 81
Table 81 Unbalanced MIL-188-114 circuits
Supported Circuits
RS
ST
SD
TR
RD
RL
TM
Page 196
lists the unbalanced MIL-188-114 circuits supported by the MSAM.
Request to Send
Transmitter Element Signal Timing from DCE
Transmit Data
Data Terminal Ready
Receive Data
Remote Loopback
Test Mode
Shield
T-BERD/MTS/SC Getting Started Guide
22046537, Rev. 016
Description
– Interface (from the TT circuit)
– Internal Synthesizer
– External Clock
– Interface Recovered
Table 80
lists the MIL-188-114 specifications.
Description
Synchronous
20 Mbps
256 Kbps
+/- 2 V terminated
10 nS
+/- 200 mV
Meets minimum input range
March 2018