Table of Contents
Advertisement
The results displayed in green or red are values for which a threshold has been defined:
in green, the value does not exceed the thresholds defined in OTDR setup, in red it
exceeds the thresholds. See
SmartLink view
Press SmartLink tab to display the SmartLink view of the results.
Figure 44
SmartLink results page
Saving results and generating a report
Once the results page is displayed, the results can be saved and a report can be gener-
ated directly from the results screen.
Saving and report can have been automatically generated if, in the file configuration, the
Auto Store parameter has been set to Yes (see
Mode.
Saving results and creating a report from results page
To generate a report:
1
Press Fast Report soft key.
A menu displays under the trace.
2
In the menu, configure the file saving mode (and the report)
"Configuring the Alarms parameters" on page
User Manual
Saving results and generating a report
page
29) with the appropriate Save
700MAN203 Rev. 007
Chapter 5 Loopback OTDR
26.
63
Advertisement
Table of Contents
