Chapter 5 Launching a reflectometry test and displaying results
Saving the trace(s) and generating a report
4
Click on View Trace(s) or Load Trace + Config.
Saving the trace(s) and generating a report
Once the results page is displayed, the trace(s) can be saved and a report can be gener-
ated directly from the results screen, in Expert Mode only.
The traces saving and report generation can have already been performed automatically
if the parameter Auto Store was defined on Yes in the Setup screen (see
on page
47) with the appropriate Save Mode (file only or file + txt or + pdf).
Saving results and creating a report from results page
To save the trace and generate a report:
1
Press Fast Report key
A menu displays under the trace.
2
In the menu, configure the file saving mode (and the report)
Figure 52
Fast report configuration
a
92
In the Save Mode parameter, select:
File Only to save exclusively the trace in a sor file
File + txt to save the trace in a sor file and to generate a txt file of the
results
User Manual
->
.
77000010208 Rev. 012
"Auto Store"