Table of Contents
Advertisement
Click here for more details on the Viavi SmartClass™ OLP-82P Digital Video Display Pro Kit with Patch Cord, Probe Scope & High-Power Optical Power Meter
5 I
NSPECTION
T
EST
Option
LIVE
VIEW
MAG
MORE...
36
Contact the professionals at Fiber Optic Center for a quote or to get more details.
focenter.com
Test
Initiates the automated PASS/FAIL test process.
NOTE:
Initiating a test can also be done by pressing the QuickCapture
button directly on the P5000i Probe or PCM.
Once the test is complete, the result will flash on the screen as
either PASS or FAIL. In addition, the outside edge of the image
will be highlighted in either green (PASS) or red (FAIL).
PASS
Fig. 18:
indication
When in the Test view, pressing the MENU key again gives the
following additional options:
Description
Returns to a live view of the image
Toggles overlay view options (3 states):
• NO OVERLAY: image only view
• RINGS: image with overlay of zones and defects
• RINGS + TABLE: image with overlay of zones, defects, and a
summary table with the analysis result for each zone
Toggles between HIGH (+) or LOW (-) magnification
Access additional inspection options
This is the same list of options that can be accessed at the
Inspection Menu when in a LIVE state (see
(for both P5000i and PCM)" on page
• 508-992-6464 | (800) 473-4237 •
23 Centre Street • New Bedford, MA 02740 USA
"INSPECTION MENU
34).
FBP-HD4i/HD4iP / OLP-82/82P
sales@focenter.com
Product data subject to change
without notice.
Advertisement
Table of Contents
